Yes, the packaging can be used repeatedly if hygiene rules are observed. Before each new filling we recommend thoroughly cleaning the bottle and the spray mechanism and then disinfecting them with a suitable alcoholic preparation, for example isopropyl alcohol (IPA 99%) or plant-based ethanol (Ethanol 96% denatured). This reduces the risk of microbial contamination and extends the safe use of the packaging.

First rinse the bottle with a suitable cleaning solution or with warm water and a mild detergent and allow it to drain thoroughly. Then we recommend applying an alcohol-based disinfectant – for example isopropyl alcohol or plant-based ethanol, with which you rinse the inside of the container and, if possible, also the internal parts of the spray dispenser. After disinfection allow the packaging to dry thoroughly at room temperature, and only then proceed to filling the new product.

The plastic packaging is not intended to be exposed to high temperatures such as dishwashing in a dishwasher, boiling or sterilizing by boiling. Under elevated temperatures the material may deform and the sealing properties of the spray dispenser may deteriorate. Therefore, for cleaning, give preference to hand washing at a moderate water temperature and disinfection with an alcoholic preparation, which does not require thermal stress on the packaging.

If you decide not to reuse the packaging, we recommend recycling it in accordance with local waste sorting rules and according to the information about the material given in the product parameters. Before handing it over to sorted collection, empty the bottle and, if possible, separate the plastic spray dispenser from the body of the packaging to facilitate processing in the recycling process. In the case of residues of chemically aggressive substances it is advisable to follow the recommendations for the disposal of the specific product that was originally used in the container.

The simplest way is to use the advanced filter in the relevant packaging category. After clicking on the category, the filter is located at the top of the page and allows clear filtering according to several parameters – for example according to neck type, size, colour or packaging material. Thanks to this, you can quickly narrow your selection to bottles, vials, jars or other containers that best correspond to your formulation and the visual concept of your product.

The spray mechanism is primarily designed for low-viscosity, aqueous or slightly viscous solutions where a fine mist is desired. For thicker emulsions or oily blends, the spray pattern may be less uniform or functionality may be limited. Therefore, for non-standard formulations we recommend carrying out a trial filling and a practical dosing test to verify whether the chosen combination of packaging and product meets your requirements.