Sprayers of this type are primarily intended for low-viscosity, aqueous or water-alcohol solutions, for which it is possible to create a fine mist. With thicker emulsions or oils, the mechanism may become clogged and the dosing uneven. Before final filling, we recommend carrying out a trial filling and testing the behaviour of the specific formulation over a longer time interval.

The sprayer and the corresponding bottle can be used repeatedly if hygiene principles are observed. Before each new filling, the packaging and the dispensing mechanism must be thoroughly cleaned and disinfected, for example using isopropyl alcohol or ethanol. For this purpose you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. It is advisable to let the disinfectant act briefly, then remove any residues and allow the components to dry completely so that the new filling is not diluted.

We recommend storing the bottle with the sprayer attached in an upright position, well closed and protected from direct sunlight and significant temperature fluctuations. This minimises the risk of liquid leaking into the thread, of product residues drying in the nozzle, and extends the service life of the dispensing mechanism. When storing highly perfumed or more aggressive preparations, it is advisable to carry out a longer-term stability test to maintain full spraying functionality.

If you decide not to reuse the packaging, we recommend first emptying it as thoroughly as possible and removing any product residues. The subsequent method of recycling depends on the specific material composition stated in the product parameters for this sprayer and the corresponding bottle. According to the material stated, you then sort the components into the appropriate container for plastics or other designated type of waste. Always follow local waste sorting rules and the recommendations resulting from the material labelling of the packaging so that recycling is as efficient as possible.

When selecting packaging, you can use the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. In the advanced filter it is possible to combine several parameters at once – for example neck type and size, overall packaging size, colour and material. Thanks to this, you can quickly display only those bottles, pharma bottles, jars or dispensing components that meet the requirements of your specific product and the intended method of use.