Yes, this packaging can be used repeatedly if hygiene principles are observed. Before each new filling we recommend thoroughly cleaning and disinfecting the bottle and the spray pump. To disinfect the inner surface and the parts that come into contact with the product, you can use for example isopropyl alcohol IPA 99 % or plant-based ethanol Ethanol 96 % denatured. After treatment it is necessary to let the packaging dry thoroughly to avoid dilution or alteration of your formulation.

For the long-term functionality of the spray pump it is suitable to use mainly watery and low-viscosity preparations without large solid particles. After using up the contents you can flush the mechanism with clean water and then with a small amount of alcohol, which will help remove residues of oils or perfumes. For thicker or highly pigmented blends we recommend regularly checking the dip tube and the nozzle and mechanically cleaning them as needed. In this way you will prevent uneven spraying or complete blockage of the spray pump.

The bottle with spray pump is ideal for aqueous and water-alcohol solutions, hydrolats, toners, light hair sprays and home or textile perfumes. It is also suitable for formulations with a lower proportion of the oil phase, which remain sufficiently fluid for smooth suction and spraying. For very thick emulsions, gels or preparations with a high content of undissolved particles we recommend considering another type of dispenser (for example a pump) or a less fine nozzle so that the mechanism is not overloaded.

If you decide not to reuse the packaging, we recommend recycling it responsibly according to the material indicated in the parameter table for the product. Before putting it into sorted waste, empty the bottle completely and, if possible, remove product residues. The metal body of the packaging is usually placed into the container intended for metal packaging, and the plastic parts of the spray pump into sorted plastic. The exact procedure may depend on the local waste collection system, so it is advisable to follow the instructions of your municipality or collection company.

The simplest way to find suitable packaging is to use the advanced filter in the packaging category on the website. After clicking on the selected category (for example bottles, jars or dispensers) you will find the advanced filter at the top of the page. Using it, you can filter products by neck type, size, color and material. By combining these parameters you can easily adapt the selection so that the packaging matches your specific formulation, the required dosing and the visual style of the brand.