Always use the bottle in a vertical position and, when dosing, apply even pressure to the dispensing element according to its design. At first use, several presses may be necessary until the system fills with product. We recommend not overfilling the bottle up to the rim so that the dispensing mechanism has sufficient space to function properly. After use, check that the dispenser is clean and closed in order to minimise the risk of drying or contamination of the outlet opening.

The packaging can be reused if hygiene principles are observed, especially with the same or a similar type of product. Before each refilling, it is necessary to thoroughly clean the bottle and the dispensing part and then disinfect them. For disinfection, we recommend using a suitable alcohol‑based agent, for example isopropyl alcohol or ethanol of quality suitable for cosmetic use, which you can find as IPA 99% isopropyl alkohol and Etanol 96% denaturovany rastlinný. After disinfection, allow all parts to dry completely at room temperature and only then refill to avoid dilution or deterioration of the new formulation.

If you decide not to reuse the packaging, we recommend recycling it according to the type of plastic indicated in the parameter table for the product. First remove as much of the remaining contents as possible, and if necessary rinse the bottle with a small amount of a suitable cleaning agent. Then place the plastic body of the bottle in the appropriate container for separated waste according to local rules (usually plastic). The dispensing element may be composed of several materials; if possible, separate the individual parts according to the recommendations of the recycling system, otherwise dispose of it in accordance with local instructions for mixed or plastic waste. By recycling the packaging, you reduce the amount of waste and support the reuse of raw materials.

Thanks to its low weight and impact resistance, the plastic dosing bottle is also suitable for travelling. Before carrying, make sure that the dispenser is firmly closed and the bottle is not overfilled, in order to reduce the risk of leakage of the contents due to changes in pressure or position. When transporting in a handbag or luggage, it is practical to place the bottle in a separate pocket or a resealable bag, which provides additional protection against possible soiling of other items. For air travel, also observe the liquid volume limits set for cabin baggage.

To make it easier to choose suitable packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on a specific packaging category. Using the filter, you can narrow down the offer according to parameters such as neck type, size, colour and packaging material. In this way, you can quickly find bottles, jars, pots or medicine bottles that match your formulation and the desired visual appearance. If you need a specific combination of packaging and closure, we recommend checking compatibility in the product details and then performing your own sealing and dosing test with your specific product.