Follow the discounted products!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with a glossy surface and an elegant dispenser represents a practical and aesthetic packaging for modern cosmetics and liquid preparations. T... read more
1,29 € incl. VAT
The plastic bottle with a glossy surface and an elegant dispenser represents a practical and aesthetic packaging for modern cosmetics and liquid preparations. Thanks to the high-quality plastic material, this bottle is suitable for packaging various liquids as well as gel formulations, while the dispenser ensures controlled and hygienic use of the product. The opaque design helps protect more sensitive components from excessive exposure to light, which contributes to the stability of the composition during storage and use.
The combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend carrying out your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation). During the test, focus in particular on the matching of the neck type, the correct function of the pump with different viscosities of the fill and the longer-term stability of the joint during storage and transport of the finished product.
All technical parameters of the packaging are listed in the attached Packaging Quality Certificate and in the product parameters.
The packaging can be used repeatedly if basic hygiene principles are observed. Before each new filling, it is necessary to thoroughly clean the bottle and the dispenser and then disinfect them with a suitable alcohol-based preparation, for example with isopropyl alcohol or plant-based ethanol. After disinfection, allow all parts to dry completely so as to avoid dilution or deterioration of the filled formulation.
Before first use and when refilling, we recommend rinsing the bottle, the internal components of the dispenser and any dip tube with a suitable soapy solution, rinsing thoroughly with clean water and allowing to dry. Afterwards, the packaging must be disinfected using an alcohol solution (e.g. products in the disinfection category such as IPA or ethanol), which is applied to the inner walls and the dosing mechanism. After disinfection, allow the packaging to air out and only then fill it with the final product.
To preserve the functionality and appearance of the packaging, we recommend storing the bottle in a dry place, protected from direct sunlight and extreme temperatures. Do not expose the packaging unnecessarily to mechanical pressure or impacts and, when travelling, check that the dispenser is locked if its design allows it. For more viscous formulations, avoid forcefully pressing the pump so as not to overload the mechanism and cause malfunction in dosing.
If you decide not to reuse the packaging, we recommend recycling it according to the type of material listed in the parameter table for the product. Before disposal, empty the packaging as thoroughly as possible and, where possible, separate the plastic bottle from the dispenser or decorative parts if they are made of different materials. Then place the individual components into the appropriate sorted waste in accordance with local recycling rules. In this way, you will support efficient material recovery and reduce the volume of mixed waste.
To select suitable packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging material category. Using the filter, you can precisely select the neck type, required size, colour variant and packaging material. By combining these parameters, you can quickly find bottles, jars or pots that will best match the character of your formulation and the intended method of use.
