The dropper bottle can be reused if hygiene principles are observed, especially in artisanal or home production of cosmetics and aromatherapeutic blends. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example IPA 99% isopropyl alcohol or Ethanol 96% denatured vegetable. It is important to disinfect not only the bottle itself, but also the cap and the part of the dropper that comes into contact with the contents, and to allow all components to dry completely.

This glass dropper bottle is ideal wherever precise, dropwise dosing and good protection of sensitive components are needed. It is particularly suitable for facial and body oils, intensive serums, oil perfumes, essential oils, aromatherapeutic blends, concentrated active substances or test samples of formulations. Thanks to the dark glass, it is especially suitable for products that are sensitive to light.

Before filling, we recommend first mechanically cleaning the dropper bottle (rinsing with a suitable cleaning agent and water), then rinsing thoroughly so that no detergent residues remain inside, and drying it completely. It is then necessary to treat the packaging and accessories hygienically – most often by applying alcohol, for example isopropyl alcohol or ethanol 96% denatured of vegetable origin. After disinfection, let all parts dry in a clean, dust-free place. Only then is the dropper bottle ready for safe filling with a new product.

If you decide not to reuse the packaging, we recommend recycling it in accordance with the material specified in the product parameters. The glass bottle can be placed in a container intended for sorted glass waste after emptying and rough cleaning. The cap with dropper is usually made of a different material than glass, so it is sorted separately according to the type of material listed in the technical parameters (for example into a plastic or metal container, if relevant). Before disposal, remove product residues and labels as far as is practically possible so that recycling is as efficient as possible.

To easily find a suitable bottle, dropper bottle or other packaging material, we recommend using the advanced filter located at the top of the page after clicking on a specific packaging category. In the advanced filter you can sort packaging clearly according to neck type, size, colour and material, or combine several parameters at once. In this way you will quickly find packaging that matches the desired design, volume and technical requirements of your formula.

Even dosing depends mainly on the viscosity of the filled product and correct tightening of the cap with dropper. Before serial filling, we recommend performing a trial test – fill several pieces, check sealing, the smoothness of dripping and the behaviour of the contents after longer standing. If the product is very thick or conversely very thin, it may be appropriate to choose a different type of applicator (for example a pump or sprayer) from the range in the relevant packaging category on Handymade. This will ensure comfortable and consistent use for the end customer.