Yes, the packaging can be reused if proper hygiene principles are followed. Before each new filling, we recommend thoroughly cleaning and disinfecting both the bottle and the spray pump to minimize the risk of microbial contamination and any impact on product stability. For disinfection, high-percentage alcohols such as IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based are suitable, helping to ensure the cleanliness of the inner surface of the packaging and the dispensing mechanism.

The bottle with spray pump is most suitable for low-viscosity, watery to slightly alcoholic solutions that can be dispersed into a fine mist. Typically these are facial and body waters, hydrolats, hair tonics, aromatherapeutic sprays or interior air fresheners. For thicker emulsions or oils, spraying may be limited, so it is always advisable to carry out a trial filling and test whether the selected formulation passes reliably through the given spray pump.

Before refilling, we recommend thoroughly rinsing the bottle with a suitable cleaning agent, then rinsing with clean water and allowing it to dry. It is then important to disinfect the inside of the bottle and the internal parts of the spray pump using alcohol, for example with the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. Allow the alcohol to act for a short time, then remove any excess and let the packaging dry completely at room temperature. During cleaning, we do not recommend using aggressive abrasive agents in order to avoid damaging the surface or the dispensing mechanism.

If you decide not to use the packaging further, we recommend including it in the separate collection system according to the materials specified in the product parameters. The glass part of the bottle can usually be placed in the container for glass after removing any remaining product and separating the plastic components. The spray pump and any plastic parts must be placed in plastic collection according to local waste sorting rules. Before handing over for recycling, it is advisable to rinse the packaging so that no residues of the original product remain inside, which facilitates its further processing.

To make it easier to choose suitable packaging, you can use the advanced filter located at the top of the page after clicking on a specific packaging category. With it, you can filter packaging by neck type, overall size, colour and material, which significantly simplifies the search for the optimal bottle, phial or jar for your formulation. We recommend thinking in advance about the desired dosing method, volume and visual style of the packaging and then using the filter to narrow down the offer to the options that best suit your product.