Yes, the glass packaging can be reused with careful handling as long as it is not mechanically damaged. However, before each new filling it is essential to thoroughly clean and disinfect both the bottle and the spray mechanism. For professional disinfection of the inner surface of the packaging, we recommend using IPA 99% isopropyl alcohol or ethanol 96% denatured plant-based. Only after the alcohols are completely dry and aired out is the packaging ready for the next safe filling.

The bottle with spray dosing is ideal for all formulations that have low viscosity and need to be dispersed in the form of a fine mist. Typically, these are facial and body toners, facial refreshers, water-based and hydroalcoholic sprays, aromatic blends for rooms or light hair sprays. For thicker emulsion or oil products, we recommend testing before use whether the spray mechanism ensures sufficiently smooth dosing without clogging.

After the contents have been used up, we recommend rinsing the bottle with a suitable cleaning agent, then thoroughly rinsing it with water and allowing it to dry. It is then necessary to disinfect the inner surface of the packaging using alcohol, for example IPA 99% isopropyl alcohol or ethanol 96% denatured plant-based. Allow the disinfecting alcohol to work briefly, then allow the bottle and the spray mechanism to air thoroughly and dry completely. When these hygiene principles are followed, the packaging is suitable for safe repeated use.

If you decide not to use the packaging further, we recommend that after emptying and basic rinsing you recycle it according to the material types specified in the product parameters. The glass bottle should be sorted into the appropriate glass container, while the plastic or metal parts of the sprayer belong in the appropriate separated waste according to their marking. Before placing them in separated collection, remove any remaining contents and, if possible, separate the glass part from the plastic spray mechanism so that the recycling process is more efficient.

On the website you can use the advanced filter, which helps you quickly select a suitable bottle, jar or other packaging. The advanced filter is located at the top of the page after clicking on a specific packaging category. It allows filtering according to key parameters such as neck type, size, colour or packaging material. Thanks to this, you can adapt the selection exactly to the requirements of your product and easily find compatible containers and closures.

When filling, it is advisable to use a funnel or dosing aid to prevent contamination of the neck and the outer surface of the packaging. We recommend pouring the contents at room temperature and avoiding sudden temperature shocks that could stress the glass. Store finished products in a dry and cooler place, away from direct sunlight and sources of heat. If you are working with a higher proportion of alcohol or volatile components, always carry out a trial compatibility test with the selected spray mechanism before series filling to verify the smoothness of dosing and the sealing.