Yes, the bottle can be reused if hygiene principles are observed, especially in your own artisanal production or when refilling the same type of product. Before each new filling it is necessary to clean and disinfect the packaging thoroughly in order to minimize the risk of microbial contamination. For disinfection we recommend using, for example, isopropyl alcohol or ethanol in a quality suitable for surface cleaning, available in the Handymade range – see the products IPA 99 % isopropyl alcohol and Ethanol 96 % denatured plant‑based. After disinfection, allow the packaging and the cap to dry completely and only then fill with a new product.

After emptying, we recommend first mechanically removing any product residues (for example by rinsing with warm water and a suitable cleaning agent), then rinsing the bottle thoroughly with clean water so that no detergent residues remain. After mechanical cleaning, the disinfection step is important – apply a small amount of isopropyl alcohol or ethanol to the inner and outer surfaces of the packaging and cap, allow it to act and then leave it to air‑dry in a clean place. A bottle prepared in this way is more suitable for reuse, especially for cosmetic formulations that are sensitive to microbial load.

If you decide not to use the bottle any further, we recommend that after emptying and basic cleaning you place it in sorted waste according to the material information given in the product parameters. The glass part of the packaging is usually sorted into the container designated for glass, and the metal cap should be sorted into the appropriate container for metals, if the collection system in your area allows it. Before placing it in sorted waste, remove any remaining contents and, where possible, labels as well, so that the packaging is integrated into the recycling process as effectively as possible. By following these principles, you contribute to more efficient handling of packaging materials.

The bottle is particularly suitable for concentrated cosmetic preparations where precise application and protection of a smaller volume are important – for example facial serums, oil blends, intensive care treatments or test batches of new formulations. It is also useful for packaging essential oils, perfume compositions and smaller laboratory samples, where a combination of inert glass packaging and a durable metal closure is required. When choosing the specific type of contents, always consider the compatibility of the formula with the material used and the dosing method.

To select suitable packaging, you can use the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. With the help of the filter you can quickly narrow down the offer according to parameters such as neck type and size, overall packaging size, colour or material. We recommend first considering the consistency and way of use of your product and then choosing a suitable combination of bottle, closure or dispenser accordingly. The advanced filter will help you compare several options and select packaging that will best meet your intentions both technically and visually.