Yes, the packaging can be reused if handled properly. When refilling, it is important to follow hygiene principles – before each new use, the bottle, spray pump and all components must be thoroughly cleaned and then disinfected. For disinfection we recommend using, for example, isopropyl alcohol or ethanol intended for packaging hygiene, which you can find in the range as IPA 99 % isopropyl alkohol and Etanol 96 % denaturovany rastlinny. Only after completely drying is the packaging ready for further use.

To make selection easier, we recommend using the advanced filter in the packaging material categories. After clicking on the relevant category, the filter is located at the top of the page and allows you to sort the range according to several parameters – especially by type and size of neck, total volume or bottle size, packaging color and materials used. This allows you to quickly filter packaging and compatible closures that will best match your specific product and method of dosing.

Before first filling, we recommend rinsing the bottle with a suitable cleaning agent and warm water, rinsing thoroughly and allowing it to dry completely. Then it is advisable to carry out disinfection, for example using alcohol-based products such as IPA 99 % isopropyl alkohol or Etanol 96 % denaturovany rastlinny. Let the disinfectant solution act briefly, pour out the excess and allow both the bottle and the spray pump to air-dry so that no residual moisture remains in the packaging which could affect the stability of your formulation.

This bottle with spray pump is suitable mainly for liquid formulations that require fine, even application in a thin layer. In practice it is used for facial and body sprays, refreshing waters, aromatherapeutic sprays for the body and interior, hair tonics, special serums for the skin, as well as for concentrated cleaning or technical solutions intended for precise and economical dosing. It is always important to test the behavior of the specific formulation in contact with the packaging and the spray pump itself.

If you decide not to reuse the packaging, we recommend prioritizing recycling according to the material composition given in the product parameters. The glass part of the bottle, after emptying and basic rinsing, is usually placed in the glass container. The spray pump and plastic components belong, depending on the type of plastic, in the appropriate sorted waste container or in mixed waste if the local system does not collect that type of plastic. Before disposal it is advisable to remove product residues to facilitate recycling and reduce environmental impact.

Store filled bottles ideally in a dry, clean environment, at stable room temperature and away from direct sunlight, unless your composition requires other conditions. Avoid extreme temperature fluctuations that could affect product stability or the sealing of the spray pump. It is advisable to store the packaging in an upright position to minimize the risk of leakage and to ensure that the spray mechanism remains fully functional throughout the entire period of use.