Before first use, we recommend thoroughly cleaning and disinfecting the bottle and all parts of the spray pump. After mechanical washing with a suitable cleaning agent, allow the packaging to be rinsed and to dry. Then carry out disinfection using a suitable alcohol, for example IPA 99 % isopropyl alkohol or etanol 96 % denaturovany rastlinný. Allow the disinfectant solution to act briefly, pour out the remainder and let the packaging dry naturally at room temperature.

The packaging can, if hygiene principles are followed, be reused for the same type of product or similar formulations. Before each new filling, the bottle and the spray pump must be thoroughly cleaned and then disinfected, ideally using the products IPA 99 % isopropyl alkohol or etanol 96 % denaturovany rastlinný. This will reduce the risk of microbial contamination and cross-contamination between individual refills. When changing the type of product (for example from an oil-based to an aqueous solution), we recommend more thorough cleaning and considering the use of new packaging.

For stable spraying it is important to choose a formulation with suitable viscosity and without coarse particles that could clog the nozzle. After filling, do not overfill the bottle right to the top so that there is space for air and for the proper functioning of the piston mechanism. Before each use, gently shake the packaging, especially in the case of blends containing an oil phase or suspended ingredients. If the nozzle becomes clogged over time, you can carefully rinse it with warm water or a suitable solvent compatible with your formulation and allow it to dry.

If you decide not to reuse the packaging, we recommend recycling it according to the material type stated in the parameter table for the product. Before handing it over for separated collection, it is advisable to empty the bottle and the spray pump and remove product residues as much as possible. Then separate the components according to material (for example plastic bottle and separate plastic-metal spray pump, if possible) and place them in the appropriate collection containers according to local waste sorting rules. By following these principles, you will support effective recycling and minimise environmental impact.

To select suitable packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. In the advanced filter you can conveniently filter according to parameters such as neck type and size, overall packaging size, colour and the material used. This will allow you to quickly narrow the selection down to packaging that best suits your formulation, dosing method and the visual style of your brand.