New in the offer!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The glass bottle with spray pump is a practical and aesthetic packaging solution suitable for packing various cosmetic and technical liquids. High-quality glass... read more
0,83 € incl. VAT
The glass bottle with spray pump is a practical and aesthetic packaging solution suitable for packing various cosmetic and technical liquids. High-quality glass in combination with a functional spray pump enables precise, fine and hygienic dosing, making the packaging ideal for products that are applied in a thin layer or as a mist. The dark, opaque glass also helps protect more sensitive formulations from the effects of light and contributes to longer stability of the contents.
This packaging is supplied as a functional combination of glass bottle and spray pump, designed for convenient and controlled dosing. Combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend carrying out your own compatibility test – checking sealing, dosing reliability and the behaviour of the packaging in contact with the specific formulation (viscosity, pH, alcohol content or oil phase).
All technical parameters of the packaging are listed in the attached Packaging Quality Certificate and in the product parameters. Before being put into practical use, we recommend testing the packaging under real storage and usage conditions so that you can be sure it fully meets the nature of your product and the method of application.
The bottle can be reused, provided that you follow basic hygiene rules and appropriate storage. Before each refilling, both the packaging and the spray pump must be thoroughly cleaned and disinfected, ideally using a suitable alcohol, for example 99% isopropyl alcohol or 96% denatured ethanol of plant origin. After rinsing and drying, we recommend testing the functionality of the spray pump with a small amount of product to verify even dosing and proper sealing.
The bottle is intended primarily for liquid preparations with low to medium viscosity that are applied by spraying. In practice, this is mainly face and body sprays, hair tonics, toners, fresheners, aromatic blends for rooms and various auxiliary solutions used in the production and application of cosmetics. For thicker emulsions or oils it is always necessary to test individually whether the given viscosity allows smooth spraying.
Before filling, we recommend working in a clean and dry environment, using disinfected tools and a suitable funnel or dosing system to minimize contact of the product with air and hands. The packaging itself must, before first and repeated use, be thoroughly washed, rinsed with drinking water, if necessary with a mild detergent, then rinsed with clean water and disinfected with alcohol (e.g. IPA 99% or ethanol 96%). After complete drying you can fill the bottle and close it tightly with the spray pump.
If you decide not to reuse the packaging, we recommend recycling it according to the material type stated in the product parameters. After emptying or rinsing, the glass bottle should be sorted into the container designated for glass. The spray pump and other plastic parts are sorted according to their material marking, which you will find in the technical description and in the quality certificate. Always follow local waste-sorting rules to ensure the most efficient processing of used packaging.
To make it easier to choose the packaging, you can use the advanced filter located at the top of the page after clicking on the relevant category (for example bottles, pharma bottles or jars). In the advanced filter you can clearly set parameters such as neck type, size, colour and material, as well as additional features depending on the category. This way you can quickly narrow down the selection to packaging that is most suitable for your specific formulation and preferred method of application.
