The bottle with dispenser is suitable for most common oils and oil blends used in cosmetics. For thicker formulations (for example castor oil or oils with a high proportion of waxes and butters) we recommend testing the flow and smoothness of dosing in advance on a small trial batch. If necessary, choose a thinner texture or adjust the ratio of oils so that the dispenser works evenly and without clogging.

Yes, the glass packaging can be reused provided you follow proper hygiene practices. Before each new filling, the bottle and the dispensing component must be thoroughly mechanically cleaned and then disinfected with a suitable alcohol-based agent, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. Only after complete drying and evaporation of the alcohol is the packaging ready for refilling, ideally with a product of a similar type, in order to minimize mixing of fragrances and residual substances.

You can wash the glass part of the bottle in warm water with a mild detergent, optionally using a suitable brush to thoroughly remove oil residues. We recommend cleaning the dispenser carefully to avoid mechanical damage, and rinsing it with lukewarm water or a suitable cleaning solution. After washing, allow all parts to dry completely and, before the next filling, carry out disinfection with the recommended alcohol. This will support long-term dispensing functionality and hygienic safety of the packaging.

If you decide not to reuse the packaging, we recommend recycling it according to the material types specified in the product parameters. The glass body of the bottle is normally placed in the container designated for glass, while plastic or metal parts of the dispenser should be separated and sorted according to local rules for plastic or metal waste. Before recycling, it is practical to empty the packaging as much as possible and remove product residues to facilitate the recycling process and reduce the risk of contamination of other sorted waste.

For easier selection we recommend using the advanced filter in the packaging material categories. After clicking on the relevant category (for example glass bottles, medicine bottles or cosmetic packaging) you will find the advanced filter at the top of the page. Using it, you can filter products by neck type, size, colour and packaging material. By combining these parameters, you can quickly narrow down the offer to packaging options that best match your specific product and method of dispensing.