News on our website
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
A glass bottle with a black glossy surface and a black-and-gold sprayer represents an elegant and professional packaging solution suitable for various liquid fo... read more
1,21 € incl. VAT
A glass bottle with a black glossy surface and a black-and-gold sprayer represents an elegant and professional packaging solution suitable for various liquid formulations. High-quality glass combined with fine spraying ensures even application of the product and helps maintain the stability of sensitive components throughout the entire period of use. The opaque design helps limit the access of light to the contents, which supports longer shelf life and stability of suitable formulations.
This bottle is supplied directly with a functional sprayer that ensures comfortable and controlled dosing of the product. Combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend performing your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation).
All technical parameters of the packaging are listed in the attached Packaging Quality Certificate and in the product parameters.
The bottle with sprayer is suitable for most liquid cosmetic products, such as facial and body sprays, toners, hydrolats or hair sprays. Before final use, we always recommend testing the behaviour of the specific formulation in the packaging – focusing in particular on compatibility with the sprayer, product viscosity, aroma stability and any sedimentation or nozzle clogging.
The glass bottle can be reused provided that hygiene rules are followed. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with a suitable alcohol-based solution, for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. In this way you minimize the risk of microbial contamination, transfer of odours or residues of previous formulations into the new product.
Before repeated use, we recommend disassembling the bottle into the glass container and the plastic parts of the sprayer. The glass can be washed with warm water and a mild detergent, thoroughly rinsed and left to dry completely. Afterwards it is advisable to rinse or spray the inner surface and the neck with disinfecting alcohol (e.g. using IPA 99 % isopropyl alcohol or ethanol 96 %). For the sprayer, we recommend pumping a small amount of alcohol through the mechanism so that the internal capillary and nozzle are also cleaned. Before refilling, let all parts dry completely.
If you decide not to reuse the packaging, we recommend recycling it according to the material composition indicated in the product parameters. After emptying and basic rinsing, the glass bottle is usually sorted into the container designated for glass. The sprayer and any plastic parts should be separated from the bottle and, depending on the type of plastic, placed in the appropriate separated waste stream, if the local collection system allows this. Before handing over for recycling, remove any product residues and make sure that the packaging is not filled with flammable or hazardous formulation residues.
To select suitable packaging, you can use the advanced filter located at the top of the page after clicking on a specific packaging category. In the advanced filter it is possible to combine several parameters at once – for example to choose the neck type, desired size, colour and packaging material. Thanks to this, you can quickly filter only those bottles, medicine bottles, jars or pumps that meet the technical and aesthetic requirements of your product.
