Yes, the packaging can be used repeatedly if proper hygiene principles are followed. Before each new filling, the bottle and the dispensing part must be thoroughly cleaned and disinfected to minimize the risk of microbial contamination and product deterioration. For disinfection, we recommend using suitable alcohol-based preparations, for example isopropyl alcohol or ethanol intended for technical disinfection, available in our range under the products IPA 99 % isopropyl alkohol and Etanol 96 % denaturovaný rastlinný. After applying the disinfectant, allow all parts to dry completely and only then refill them.

Before both the first and repeated use, we recommend first removing dust and dirt residues by rinsing with a suitable detergent and water, disassembling the dispenser into individual parts to the extent allowed by its construction. After washing, the packaging must be carefully rinsed to ensure no residues of cleaning agents remain. Then apply disinfection using an alcohol solution, for example the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný, and let the bottle and dispenser air dry at room temperature. Fill only when all parts are completely dry.

If you decide not to reuse the packaging, we recommend placing it in sorted waste collection according to the material specified in the product parameters. After emptying and basic rinsing, the glass container is normally placed in the glass recycling bin, and it is advisable to separate metal or plastic parts of the closure and dispensing system and sort them separately according to the respective material. Always follow local waste separation rules and the information in the parameter table for the product on the Handymade website, where the specific material type and recommended recycling method are provided. In this way you minimize environmental burden and enable further use of the material.

This type of glass bottle is ideal for products where precise and economical dosing of a small amount of liquid is important. In practice it is used mainly for facial and body oils, serums, concentrated oil elixirs, aromatherapeutic blends and herbal extracts intended for external use. Thanks to the drop dosing system, it is also suitable for products with a higher concentration of active substances, where control of every single drop is necessary. The packaging is also practical for smaller development and test batches that require professional packaging and consistent application when testing formulations.

To choose suitable packaging, you can use the advanced filter located at the top of the page after clicking on a specific packaging category. In the advanced filter you can clearly select the parameters that are key for your product – for example the type and neck diameter, required size, colour of the packaging or material used. By combining these filters, you quickly narrow the offer down to packaging that meets the technical and aesthetic requirements of your formulation. In this way you can more easily find the optimal bottle, dropper bottle, jar or dispenser for the specific product type and method of application.