Yes, the packaging can be used repeatedly if hygiene principles are observed. Before each new filling, it is necessary to thoroughly clean the bottle and subsequently disinfect it with a suitable alcohol-based preparation, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured, plant-based. This minimises the risk of microbial contamination and the impact on the stability of the new filling.

When cleaning, we recommend first thoroughly rinsing away the residues of the original product with a suitable cleaning agent and warm water, then rinsing the bottle several times with clean water and allowing it to dry completely. Before a new filling, it is advisable to disinfect the inner surface with alcohol, for example with IPA 99 % isopropyl alcohol or ethanol 96 % denatured, plant-based, and only refill the packaging after the alcohol has evaporated.

If you decide not to reuse the bottle, we recommend recycling it in accordance with local waste-sorting rules. In most cases, the glass packaging is intended to be placed in the glass-recycling container. Before disposal, it is advisable to empty the bottle of product residues and separate any plastic or metal closure, which belongs in the corresponding type of sorted waste. The specific recommended method of recycling is based on the information about the material given in the product parameters.

The glass bottle is particularly suitable for concentrated cosmetic preparations and formulations where the protection of sensitive components and precise dosing are important. You can use it for facial serums, oils, active solutions, toners, aromatherapeutic blends, caring oil concentrates or laboratory test samples. When selecting a suitable closure or dispenser, take into account the viscosity and the method of application of the final product.

To make selecting packaging easier, you can use the advanced filter located at the top of the page after clicking on a specific packaging-material category. Using the filter, you can quickly narrow down the offer according to the type of neck, size, colour and packaging material. This way you can easily find a bottle, jar or pot that will best match the composition and method of application of your product.

When choosing a closure, dropper or spray head, we recommend basing yourself on the product parameters, where you will find information on the type of neck and recommended combinations. It is then advisable to perform your own test with your specific formulation: check the sealing during transport and impacts, consistent dosing during repeated use, as well as the behaviour of the packaging in contact with the product at different temperatures. In this way, you verify the functionality of the entire combination under real conditions of use.