Yes, the packaging can be reused with appropriate handling; however, we recommend observing strict hygiene rules. Before each new filling, the bottle and the dispenser must be thoroughly cleaned and disinfected in order to minimize the risk of microbial contamination. To disinfect the surfaces and internal parts of the packaging, you can use isopropyl alcohol or ethanol, for example the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After disinfection, allow all parts to dry completely and only then proceed to fill the new product.

First empty the bottle and, depending on the type of formulation, mechanically remove the product residues, for example by rinsing with a suitable soapy solution. Then rinse the packaging thoroughly with clean water and allow it to dry. Before reuse, we recommend disinfecting the internal surfaces of the bottle and the accessible parts of the dispenser with an alcohol solution, for example by using isopropyl alcohol or ethanol. Allow the alcohol to evaporate at room temperature. When cleaning the dispenser, it is advisable to perform a test with water to verify that the dosing system has remained fully functional and not clogged.

If you decide not to reuse the packaging, we recommend recycling it in accordance with local waste sorting rules and the information provided in the product parameters. The glass body of the bottle is usually sorted into the container intended for glass after removal of product residues. The cream dispenser may be made up of several materials (plastic, metal spring), so it is advisable to follow the recycling recommendations given in the product parameter table on the page. Before handing it over for collection, it is a good idea to empty the contents as much as possible and at least roughly rinse the packaging to facilitate subsequent processing.

The cream dispenser is designed primarily for commonly viscous creams and emulsions of medium consistency. For very thick formulations, a slight adjustment of the recipe may be necessary, for example by slightly reducing the viscosity so that the movement of the product in the system remains smooth. For very light, fluid emulsions, it is instead an advantage that the dispenser allows controlled delivery without spraying. We always recommend carrying out a trial filling and dosing test on a small batch to verify that the texture of your specific product is fully compatible with this type of packaging.

To quickly find suitable packaging, we recommend using the advanced filter in the packaging material categories. After clicking on the relevant category, you will find the filter at the top of the page, where you can conveniently combine various criteria. Packaging can be filtered by neck type, size, colour and material, which enables you to adapt your selection to the specific requirements of the product and the design of your brand. Thanks to the filters, you can easily find compatible bottles, vials, jars or dispensers without laborious manual browsing through the range.