Yes, the packaging can be used repeatedly if basic hygiene principles are observed. Before each new filling, the bottle and the dispensing top must be thoroughly cleaned and then disinfected with a suitable preparation, for example using isopropyl alcohol or ethanol. For this purpose, you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. It is advisable to carry out disinfection after washing and completely drying the packaging in order to minimize the risk of microbial contamination of the new contents.

We recommend first mechanically rinsing the bottle with lukewarm water and a mild detergent intended for hand washing. Then it is advisable to rinse the packaging thoroughly with clean water so that no residues of the cleaning agent remain in it. After drying, it is important to disinfect the inner surface and the dosing mechanism with an alcohol solution (e.g. IPA or ethanol) and allow it to evaporate completely. Do not use aggressive solvents that have not been verified as compatible with the given plastic material, and avoid high temperatures during cleaning so that the packaging is not deformed.

Yes, considering its compact dimensions and low weight, this packaging is practical for carrying. The closure with dispenser is designed so that, when properly closed, it minimizes the risk of leakage of the contents during transport. Before placing it in a handbag or travel bag, we recommend checking that the cap is fully tightened and, in the case of very liquid or high-value formulations, placing the bottle in a separate protective bag or case as an additional safeguard.

If you decide not to use the packaging any further, we recommend first completely emptying it and, if possible, rinsing it so that no residues of the original contents remain. Then proceed according to the recycling recommendations given in the product parameters, where the type of plastic material and the relevant recycling marking are specified. If possible, it is advisable to separate the bottle and the cap from each other and sort them into the appropriate plastic container according to local waste collection rules. In this way, you will support efficient material recycling and reduce the amount of unnecessary waste.

To make it easier to choose a suitable bottle, medicine bottle or other type of packaging, you can use the extended filter in the categories on our website. This filter is located at the top of the page after clicking on a specific packaging category. It allows you to narrow down the selection according to key parameters such as type and size of neck, overall size of the packaging, colour or material used. Thanks to this, you will quickly find packaging that is compatible with your existing closures or dispensers and at the same time meets the requirements of your product (for example design, volume or material preferences).