The bottle with dispenser is most suitable for liquid to medium-viscosity preparations such as light emulsions, body milks, fluids, or gel textures. For very dense creams, dosing may be limited or uneven, so we always recommend performing a trial filling and checking the smooth operation of the pump before the final filling of a larger batch.

The packaging can be reused if strict hygiene principles are followed. Before each new filling, the bottle and dispenser must be thoroughly cleaned and then disinfected with a suitable agent, for example isopropyl alcohol IPA 99 % or plant-based ethanol Ethanol 96 %. Allow the disinfectant solution to act, then remove the excess and let the packaging dry completely. When changing the type of product (for example from an oil to a watery preparation), we recommend especially thorough cleaning so that the new formulation is not affected.

After emptying the bottle, it is advisable to rinse the dispenser several times with warm (not boiling) water, or with a mild soapy solution, pressing the pump several times so that the solution reaches the entire mechanism. Then rinse it with clean water, allow it to drain, and let it dry thoroughly. After drying, the internal parts can be disinfected by spraying or rinsing with a suitable alcohol-based disinfectant and again left to dry completely. We do not recommend mechanically disassembling the dispenser without experience so as not to damage the seal or the spring.

If you decide not to reuse the packaging, we recommend that after emptying and basic rinsing you place it in sorted waste according to the type of plastic indicated in the product parameters and on the recycling marking of the packaging. It is advisable to separate the bottle and dispenser, or divide them into more parts if they are made of different materials. Remove product residues so that they do not interfere with the recycling process. Adapt the exact sorting method to the recommendations of the local collection system, which is based on the recycling symbols on the packaging and the information in the parameter table next to the product on the Handymade.sk website.

The simplest way to choose a suitable packaging is to use the advanced filter in the packaging material category. After clicking on a specific category (for example bottles, dropper bottles, or jars), you will find at the top of the page the option to filter according to several parameters. You can choose the neck type, size, color, and packaging material, thereby quickly narrowing the offer only to packaging that suits your product and filling technology. Thanks to this, you can easily compare several options and find the ideal combination of design, functionality, and compatibility with your formulation.