The packaging can be reused if basic hygiene rules are observed. Before each new filling, the bottle and the dosing pump must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example using isopropyl alcohol of technical grade purity or ethanol suitable for surface disinfection. For this purpose, you can use the products IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant-based. Disinfection must be carried out before each new filling in order to minimize the risk of microbial contamination of the product.

After emptying the contents, it is advisable to rinse the bottle and the pump with warm water and a mild detergent, then rinse thoroughly with clean water and allow to dry completely. When preparing for a new filling, we recommend disinfecting the packaging with an alcohol solution, for example with the products IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant-based. Avoid using aggressive cleaning agents that could damage the material, and always check whether any residues of the previous product remain in the pump system.

If you decide not to use the packaging any further, we recommend completely emptying it and removing any product residues before disposal. Then follow the recommended method of sorting based on the material specified in the product parameters on the Handymade.sk website – place the packaging in the appropriate container according to local waste sorting rules. The pump may be composed of several types of plastics, so it is advisable to follow local instructions for sorting so-called composite plastic packaging. In this way, you support material recycling and reduce the amount of mixed waste.

The dosing pump is ideal for liquid and semi-liquid formulations such as body and face lotions, gels, liquid soaps, light creams and hair products. It works best with products of low to medium viscosity that can be easily drawn into the pump mechanism. For thicker formulations, we recommend carrying out a trial filling to verify smooth dosing and the return suction of the product into the pump system.

When selecting suitable packaging, we recommend using the advanced filter, which is available at the top of the page after clicking on the relevant packaging material category. Using the filter, you can sort the range according to parameters such as neck type and diameter, size, colour and packaging material. In this way you can quickly find bottles, vials, jars or containers that best match the properties of your product and the desired method of dosing or application.