Yes, the packaging can be used repeatedly if hygiene principles are observed. Before each new filling, the bottle must be thoroughly cleaned and disinfected in order to minimise the risk of microbial contamination and product deterioration. For disinfection, we recommend using a suitable alcohol-based preparation, for example isopropyl alcohol available on the page IPA 99 – isopropyl alcohol or plant-based ethanol Ethanol 96% denatured plant-based. After applying the disinfectant, allow the surface to dry thoroughly and only then refill the bottle.

Before the first filling, it is advisable to rinse the bottle with clean water, use a mild cleaning agent if necessary, and rinse it thoroughly so that no detergent residues remain. We then recommend applying an alcohol-based disinfectant, for example the products IPA 99 – isopropyl alcohol or Ethanol 96% denatured plant-based. After disinfection, let the packaging dry naturally in a clean place, ideally upside down on an absorbent surface, in order to remove any remaining moisture before filling.

If you decide not to reuse the packaging, we recommend recycling it according to the material type specified in the product parameters. The glass part of the bottle can usually be placed in a container intended for glass sorting in accordance with local rules. The cap and any seals made of different materials should be separated and sorted separately according to the instructions of your municipality or waste management company. Before handing over for recycling, it is good to rinse the packaging to remove coarse product residues, in order to facilitate the recycling process and reduce the risk of odour.

The bottle is especially suitable for liquid and slightly viscous products where precise and controlled dosing is important. In combination with a dropper, it is ideal for facial serums, oil extracts and concentrated solutions. When using a classic screw cap, it can serve as a container for trial samples or concentrated blends which the user then takes out as needed. We recommend adapting the choice of specific closure type to the viscosity and method of application of the final product.

The simplest way to find a suitable bottle or other packaging is to use the advanced filter in the relevant category. After clicking on the packaging category, a panel with an advanced filter will appear at the top of the page, where you can clearly sort the results according to several parameters. The key ones are in particular the filtering options by neck type, size, colour and material, which makes it easy to narrow down your selection to packaging that meets the technical and aesthetic requirements of your product.