Yes, the bottle can be reused if hygiene principles are observed. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with a suitable alcohol solution, for example using the products IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based. After rinsing, allow all parts to dry completely so that moisture does not accumulate inside the packaging, and only then apply a new cosmetic formulation.

First, the dispenser should be mechanically cleaned of cream residues, for example using warm (not boiling) water and a mild, non-aggressive cleaning agent. Then we recommend flushing the dispensing mechanism with clean water to remove all cleaner residues, and finally disinfecting it with a suitable alcohol solution. After disinfection, leave the dispenser to air dry in a clean environment. For thicker creams, repeated pumping of clean water through the dispenser can help to release any deposits in the channels.

If you decide not to reuse the packaging, we recommend recycling it responsibly. The glass part of the bottle can usually be placed, after removing product residues, in a container designated for glass in accordance with local recycling rules. The dispenser and smoky top are usually made of plastic material and belong in the appropriate plastic container, unless local rules state otherwise. Before recycling, it is advisable to rinse the packaging to remove product residues, which will make subsequent processing of the material easier. Always adapt the specific sorting method to the information given in the product parameters and to local waste management guidelines.

The bottle with cream dispenser is ideal for cosmetic formulations with medium to higher viscosity, such as face creams, emulsions, emulsion serums, hand creams and targeted products for specific skin areas. It is also suitable for products with active ingredients, where it is desirable to limit contact of fingers with the contents and ensure more precise dosing. Before final implementation, we recommend testing the consistency and behaviour of the specific recipe in the packaging so that you can be sure of smooth dosing and end-user satisfaction.

To select suitable packaging, you can use the advanced filter, which is located at the top of the page after clicking on a specific category (for example bottles, jars, pots or dispensers). In the advanced filter you can easily filter according to parameters such as neck, size, colour and material, as well as other available criteria. In this way, you can quickly narrow down the range to packaging that matches the required combination of design, material and technical properties for your specific product.