Yes, the packaging can be used repeatedly if handled correctly. For each new filling, however, it is necessary to clean and disinfect the bottle and the dispenser thoroughly in order to minimise the risk of contamination of the new refill. For disinfection we recommend using a suitable alcohol-based disinfectant, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. After disinfection, allow all parts to air out and dry thoroughly and only then refill the packaging again.

Before each new filling we recommend rinsing the bottle with warm water and a suitable cleaning agent, or a mild detergent intended for dishes or laboratory glassware. Then the packaging must be rinsed thoroughly with clean water so that no residues of the cleaner remain, and you should continue with disinfection using alcohol (for example IPA or ethanol). After applying the disinfection, allow the packaging and the dispenser to dry completely at room temperature. During handling we recommend using clean hands or gloves in order to maintain maximum hygiene.

If you decide not to reuse the packaging, we recommend recycling it according to the type of plastic indicated in the product parameters on the Handymade.sk website. Before handing it over to sorted collection, empty the contents, roughly rinse the packaging and separate the individual parts (bottle, pump and possibly tube) according to local waste sorting rules. Follow the recycling symbol and the recommendation in the product parameter table – in this way you will ensure that the packaging is processed in the correct recycling stream and you will reduce its ecological footprint.

Yes, the construction of the packaging is also suitable for practical carrying and for use in a professional environment. The compact bottle with dispenser allows hygienic application of the product without contact of the contents with the surrounding environment. When travelling, we recommend securing the dispenser before placing it in luggage (for example with a pump lock or protective cap, if it is part of the specific version) to prevent unintentional pressing. In salons and studios it is appropriate to clean the surface of the dispenser regularly and to pay attention to compliance with hygiene standards.

To make it easier to choose packaging, we recommend using the advanced filter, which you will find in the upper part of the page after clicking on the relevant packaging category (for example bottles, jars or pots). In the advanced filter you can conveniently narrow the selection according to several parameters – in particular according to the type and size of the neck, the overall size of the packaging, the colour and the materials used. By combining these filters you will quickly find a packaging that matches the required dosing, design and technological requirements of your specific formulation.