News on our website
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with matte dispenser represents a practical and aesthetic packaging suitable for both professional and hobby use in cosmetics. Thanks to its ... read more
1,29 € incl. VAT
The plastic bottle with matte dispenser represents a practical and aesthetic packaging suitable for both professional and hobby use in cosmetics. Thanks to its modern design and precise dispensing, it is ideal for liquid and slightly gel-like formulations where control of consumption and clean product application are important. The reliable pump mechanism helps protect the contents from contamination by air and touch, which supports the stability and shelf life of your formulations.
The packaging is designed to withstand common cosmetic formulations such as oil/water emulsions, hydrophilic blends and lighter oil-based products. The visually clean execution of the bottle and the elegant dispenser with a discreet appearance are suitable for artisanal and semi-professional production and allow you to create a uniform, representative product range.
This bottle is supplied directly with a functional dispenser that is design- and size-matched to the specific packaging. Combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend performing your own compatibility test (sealing, dispensing and the behaviour of the packaging in contact with the specific formulation) so that you can be sure the packaging works reliably with your specific product even after longer storage.
All technical parameters of the packaging are listed in the attached Packaging Quality Certificate and in the product parameters.
The bottle with dispenser is intended primarily for liquid to semi-liquid products – body and face lotions, light emulsions, moisturizing fluids, liquid soaps or gels. For very thick creams, dispensing may be limited, so we always recommend carrying out a trial filling and testing whether the pump expels the product smoothly and without excessive effort. If during the test the pump has difficulty drawing up the product or clogs the outlet, it is advisable to choose a thinner texture or another type of packaging.
The packaging can be reused if hygiene principles are observed, whether for the same type of product or for different cosmetic formulations. Before each new filling, however, the bottle and dispenser must be thoroughly cleaned and disinfected to minimize the risk of microbial or chemical contamination. For disinfection, we recommend using isopropyl alcohol or ethanol, for example the products IPA 99 % isopropyl alkohol and Etanol 96 % denaturovaný rastlinný. After disinfection, allow all parts of the packaging to dry completely and only then refill the bottle.
It is advisable to clean the plastic packaging with lukewarm water and a mild cleaning agent, and then rinse thoroughly with clean water. Avoid using very hot water, aggressive chemical cleaners or mechanically abrasive sponges, which could damage the surface of the packaging or the functional parts of the pump. After washing, we recommend disinfecting the inner and outer surfaces with an alcohol-based preparation (for example IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný) and allowing everything to dry completely at room temperature. The packaging is not intended for boiling or for cleaning in a dishwasher, as high temperatures may cause deformation of the plastic or weakening of the dispenser function.
If you decide not to use the packaging further, we recommend recycling it in accordance with local waste sorting rules and the information given in the product parameters for this packaging on the Handymade.sk website. Before handing it over for recycling, it is advisable to empty the bottle and dispenser as much as possible and rinse out any product residues. Then separate the individual components according to the type of material (bottle body, pump, any dip tube, decorative elements) and place them in the appropriate containers according to the local collection system. In this way, you support efficient processing of plastics and reduce the amount of waste.
To select the right packaging, you can use the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category (for example bottles, jars, dispensers). In the advanced filter you can conveniently combine several criteria – type and size of neck, overall size of the packaging, colour and material. This allows you to quickly search only for those products that match your specific formulation and design requirements. We recommend starting by setting the key parameters (for example material and type of closure) and then further refining your selection using additional filters as needed.
