News on our website
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The glass bottle with a black matte surface and a glossy white-gold dispenser represents an elegant and practical packaging for liquid cosmetic preparations as ... read more
1,25 € incl. VAT
The glass bottle with a black matte surface and a glossy white-gold dispenser represents an elegant and practical packaging for liquid cosmetic preparations as well as serums with higher added value. The opaque dark glass helps minimize the penetration of light to the contents, which supports the stability of sensitive components and extends the usability of a correctly formulated product. The high-quality dispensing mechanism enables comfortable and controlled application, so that waste and contamination of the contents during normal use are minimized.
This packaging is supplied as a complete set – bottle with dispenser, with the dispensing part already designed to match the neck dimensions and the character of typical liquid preparations. The combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we recommend always performing your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation), especially for products with a high content of acids, alcohols or atypical active substances.
All technical parameters of the packaging are given in the enclosed Packaging Quality Certificate and in the product parameters.
The packaging can be reused if handled correctly and gently, but it is always essential to observe basic hygiene principles. Before each new filling, we recommend thoroughly cleaning the bottle and the dispenser and then disinfecting them with a suitable product, for example isopropyl alcohol or ethanol intended for this purpose. On Handymade you will find, for example, disinfectant raw materials such as IPA 99% isopropyl alcohol and Ethanol 96% denatured plant-based. Only after complete drying and airing is the packaging ready for refilling.
It is advisable to first rinse the glass part of the packaging with warm water and a mild cleaning agent, then rinse thoroughly with clean water and allow it to dry freely. After drying, we recommend disinfecting the inner surface and the thread using alcohol, for example the products IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based. Clean the dispenser gently, without using aggressive mechanical tools, so that the seals and the dispensing mechanism are not damaged; before reuse, make sure that all parts are dry and functional.
When deciding between reuse and recycling, we recommend first assessing the condition of the packaging. If the packaging is damaged or you do not wish to use it any longer, follow the recycling symbols stated in the product parameters. The glass part can usually be placed in glass waste after removing product residues and rinsing, while the plastic components of the dispenser belong in the appropriate sorted waste according to the material used. Before disposal, it is advisable to separate the individual parts so that they can be processed in accordance with local waste sorting rules.
The bottle with dispenser is ideal especially for products with a liquid to slightly viscous consistency, where precise dosing of a smaller amount is important – for example facial serums, oil elixirs, light emulsions or special treatment blends for targeted use. For formulations with very high viscosity or with a pronounced content of undissolved particles, it is necessary to test the dosing in advance so that you can be sure of the smooth operation of the dispenser and even application.
To make it easier to choose a suitable bottle, vial or jar, you can use the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. In the advanced filter you can conveniently set parameters such as neck type and diameter, overall size, colour and packaging material. Thanks to this, you will quickly filter out packaging that matches your formulation as well as your design requirements, and you can easily compare them with each other.
