+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

MICA POWDERS

MICA Pigment Powder, Brushed Bronze, 500 g

Pack size10 g50 g200 g500 g

Mica pigment powder, Brushed Bronze is a pearlescent pigment of mineral origin based on mica, which gives products a bronze-brown shade with a pearlescent shimmer . full description

AvailabilityIn stock · last 1 pack
Product codeFM875_500
€69.99incl. VAT€139.98/kg

Lowest price in the last 30 days: €69.99

Product description

Mica pigment powder, Brushed Bronze is a pearlescent pigment of mineral origin based on mica, which gives products a bronze-brown shade with a pearlescent shimmer. It is used mainly in decorative cosmetics for the eyes, lips and body, and for colouring soaps. Processing temperature does not limit it, so it can be added to the oil phase as well as to the finished mixture.


How the bronze shimmer is created

The pigment is based on tiny mica flakes coated with a layer of titanium dioxide and yellow and red iron oxide. The flakes reflect light and create a pearlescent shimmer, while the iron oxides provide the warm brown tone.

The resulting effect depends on particle size. At 10–60 µm, the pigment gives a pearlescent shimmer with good coverage. The powder is odourless.


Use in formulations

The pigment does not dissolve in water; it only disperses in the mixture. It is added to the oil phase, during the cool-down phase or afterwards to the finished mixture. Processing temperature is not limited, as the pigment is stable up to 800 °C.

The usage rate depends on how intense the colour should be. The recommended range is 1–30%, with higher rates common in decorative cosmetics. The pigment is suitable for formulations with a pH of 6–9, for both rinse-off and leave-on products, and for all skin and hair types.

First mix the pigment in a small amount of carrier oil, glycerine or alcohol, and only then add it to the product. This prevents lumps and uneven colour.

When calculating the recipe, keep in mind that the powder binds oil. For every 100 g of pigment, allow for 50–65 g of oil.


Suitable for products such as

  • Eye shadows – they show off both the pearlescent shimmer and the coverage of the pigment.
  • Lipsticks, lip balms and lip glosses – the pigment disperses in the oil phase and is also intended for the lips.
  • Bronzers, body oils and butters with shimmer – decorative products for the body.
  • Cold process soap – for colouring the soap batter.
  • Soap made from a glycerine soap base – especially a clear one, where the shimmer is most pronounced.
  • Bath bombs – together with Polysorbate 80, which improves the dispersion of the pigment.
  • Surface decoration of candles – for decorating the surface only; it is not used for colouring the wax itself.

Behaviour in soap

In cold process soap and in glycerine soap base, the pigment does not bleed. In cold process soap, the shade can be vivid or more subdued depending on the technique used. The sparkle tends to be weaker, while the pearlescent shimmer remains.

It looks the brightest in clear glycerine soap base. Light falling on the mica flakes intensifies the sparkle.


Good to know

In water-based mixtures, this type of pigment disperses less well and may settle. For lotions and other water-based products, a water-dispersible pigment is more suitable.

The shade may differ between batches by up to 2%. If you need to match the colour exactly to a previous production run, make a test sample from the new batch.

The pigment meets the requirements of Annex IV of Regulation (EC) No 1223/2009, including the limits for heavy metals. It contains no nanomaterials, intentionally added microplastics or raw materials of animal origin. It is not classified as hazardous under the CLP Regulation.

When working with the powder, do not inhale the dust. Use a respirator and eye protection, and observe good hand hygiene.


Frequently asked questions

Is mica Brushed Bronze water-soluble?
No, mica Brushed Bronze is insoluble in water and only disperses in the mixture. In water-based mixtures it disperses less well and may settle, so it is added to the oil phase, during the cool-down phase or to the finished mixture. In bath bombs, it is added together with Polysorbate 80, which improves the dispersion.
What is the usage rate of mica Brushed Bronze?
The recommended usage rate of mica Brushed Bronze is 1–30%, depending on the required colour intensity and shimmer. Higher rates are used mainly in decorative cosmetics. At higher rates, keep in mind that the powder binds oil, and take this into account when calculating the oils in the recipe.
Can mica Brushed Bronze be used on the lips and around the eyes?
Yes, mica Brushed Bronze is intended for decorative cosmetics on the lips, body and the eye area. The pigment consists of mica with a layer of titanium dioxide and iron oxides and meets the purity criteria for dyes, including the limits for heavy metals. It can be used in rinse-off and leave-on products with a pH of 6–9.
Is mica Brushed Bronze suitable for cold process soap?
Yes, mica Brushed Bronze is suitable for cold process soap and for glycerine soap base, and it does not bleed. In cold process soap, the shade can turn out vivid or more subdued depending on the technique, and the sparkle is weaker, but the pearlescent shimmer remains. It is most striking in clear glycerine soap base.
How do I mix mica Brushed Bronze without lumps?
First mix mica Brushed Bronze in a small amount of carrier oil, glycerine or alcohol, and only then add it to the product. This spreads the colour evenly and leaves no lumps in the mixture. The prepared mixture can be added to the oil phase, during the cool-down phase or afterwards to the finished product.
Can mica Brushed Bronze be used for colouring candles?
Mica Brushed Bronze is not used for colouring the wax itself; it is suitable only for decorating the surface of a candle. The pigment can be rubbed into the surface of a wax candle or mixed with an acrylic polymer emulsion and applied with a brush or by spraying. The pigment itself is non-flammable.

Parameters

INCI
Mica, Titanium Dioxide, Iron Oxide Yellow, Iron Oxide Red
CAS No.
12001-26-2, 13463-67-7, 51274-00-1, 1309-37-1
EC number
310-127-6, 236-675-5, 257-098-5, 215-168-2
Product colour
Brown
CI number
CI 77019, CI 77891, CI 77492, CI 7749177019, 77891, 77492, 77491
Country of origin
Spain
Processing method
Surface treatment
Appearance
Powder
Function in formulation
Colorant
Application area
Eye areaBodyLips
Recommended processing temperature
Bez obmedzenia °C
Recommended usage rate
1 - 30 %
Recommended formulation pH range
6,00 – 9,00
Solubility
Water-insoluble
Application type
Leave-onRinse-off
Biodegradability
Not applicable
Natural Index (NI ISO 16128)
0,00
Natural Origin Index (NOI ISO 16128)
1,00
Organic content
0 %
Renewable Carbon Content (RCC)
0 %

Product documentation

CoACertificate of Analysis
batch 290394PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

2 PDF files in one archive

Learn how to work with it

From our blog
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.