Yes, the package can be used repeatedly if hygiene principles are observed. Before each new filling, the bottle and the spray pump must be thoroughly cleaned and disinfected, ideally with a suitable alcohol-based preparation, for example isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After cleaning, let all parts dry completely and only then refill.

The bottle with spray pump is suitable for liquid products that are to be applied as a fine mist or spray. Typically these are face toners, refreshing and hydrating sprays, hair tonics, body care preparations, aromatherapeutic mist sprays or light disinfecting solutions. Always adapt the suitability of the package to the viscosity and composition of the specific formulation and perform a trial dosing before filling.

After the contents have been used up, we recommend disassembling the bottle into the body and the spray pump, rinsing both parts with a suitable cleaning agent, rinsing thoroughly with clean water and then disinfecting. For disinfection it is appropriate to use alcohol solutions, for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. You can clean the spray pump by spraying a small amount of disinfecting solution through it several times. Before the next use, make sure that the package is completely dry and free of residues of the original product.

If you decide not to reuse the package, we recommend recycling it responsibly according to the material specified in the product parameters. First, use up or safely dispose of any remaining contents according to the nature of the preparation. Then empty the bottle and the spray pump as much as possible, and if needed, rinse them with a small amount of water. According to the material designation in the parameter table, place the individual parts into the appropriate sorted waste stream (for example plastic). If you are not sure about the local sorting rules, follow the instructions of your collection company or the local waste sorting system.

To select a suitable bottle, medicine bottle or other package, we recommend using the extended filter in the packaging material categories. You can find it at the top of the page after clicking on the relevant category, where you can clearly filter packages according to neck type, size, colour and material. In this way you can quickly narrow down the selection to only those packages that meet your technical and design requirements and thus more easily choose a solution for a specific formulation or project.