The glass bottle is suitable for a wide spectrum of oil-based and water-based formulations, as long as they are compatible with the type of closure you choose. Before implementing it in production, we recommend preparing a trial batch to verify the behaviour of the fill over time, the sealing of the closure and the uniformity of dosing during real use.

The glass medicine bottle can be used repeatedly if strict hygiene principles are followed. Before each new filling, the container must be thoroughly cleaned and subsequently disinfected with a suitable alcohol, for example with products available on Handymade: isopropyl alcohol in quality suitable for cleaning packaging can be found at IPA 99 % isopropyl alcohol 1 l and plant-based ethanol on the page Ethanol 96 % denatured plant-based 1 l. Disinfection helps minimize the risk of microbial contamination during repeated use.

The choice of closure depends on the type of product and the desired method of application. For concentrated serums and tinctures, droppers are often used; for toners and liquid solutions, spray pumps are practical; and for simple solutions, a classic screw cap is sufficient. When choosing, follow the parameters specified for the product and, at the first filling, always check whether the closure seals correctly, whether the dosing meets your requirements and whether the formulation used does not affect the functionality of the mechanism.

If you decide not to reuse the medicine bottle, we recommend that, after emptying and basic cleaning, you place it in separated glass collection according to local waste management rules. Glass packaging is usually placed in containers intended for glass, while plastic or metal closures should be sorted separately according to the instructions of your municipality. When recycling, follow the information given in the parameter table for the product to choose the correct recycling stream and support the reuse of raw materials.

On Handymade, you can use the advanced filter when making your selection; it is located at the top of the page after clicking on the relevant packaging category. In the filter you can clearly narrow down the offer by neck type, size, colour and packaging material, which significantly facilitates the search for a suitable bottle, medicine bottle or jar for your specific product. We recommend first filtering by material and volume, and then fine-tuning the colour and neck type according to the planned closure or dispenser.