The bottle can, with appropriate handling, be used repeatedly, but we always recommend observing strict hygiene rules. Before each new filling, both the packaging and the sprayer must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example with the products IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based. Only after the alcohol has completely dried and evaporated is the bottle ready for further safe use.

Before reuse, it is advisable to rinse the bottle with warm water and a mild cleaning agent, rinse thoroughly with clean water and allow it to dry. We then recommend disinfecting the inner surface and the thread with an alcohol solution, for example by using isopropyl alcohol or plant-based ethanol. For the sprayer, it is advisable to actuate the mechanism several times with the cleaning solution and then with the disinfecting solution so that the internal channel section is also flushed. After complete drying, the packaging can be refilled.

If you decide not to use the packaging any further, we recommend recycling it according to the information given in the product parameter table. Follow the recycling symbol and material designation on the packaging; place the empty and, where possible, rinsed bottle into the appropriate sorted waste according to local collection rules (for example, a plastics container for plastic versions). The sprayer mechanism should be disposed of according to the instructions for mixed or sorted waste, depending on its construction and the local collection system. Before disposal, it is advisable to remove any product residues to facilitate recycling.

The bottle with sprayer is ideal for liquid products with low to medium viscosity where even application in a thin layer is important. In practice it is often used for facial and body sprays, hydrolats, hair tonics, care sprays for textiles, interior fragrances or gentle cleaning solutions for surfaces. Before filling, we recommend testing whether the specific formulation does not clog the nozzle and whether the spraying remains smooth and even.

To make selection easier, we recommend using the advanced filter, which you can find at the top of the page after clicking on the relevant packaging category. With the filter you can sort products according to parameters such as neck type and diameter, size, colour or packaging material. By combining these criteria, you can quickly select bottles, jars, dropper bottles or other packaging that best match your formulation and the desired dosing method.