Yes, the bottle with dispenser is suitable for packaging various liquid cosmetic products, such as toners, light emulsions, body and face lotions or oil blends intended for external use. When planning the use, we always recommend testing the compatibility of the specific formulation with the packaging – especially with a high proportion of essential oils or active ingredients – in order to verify proper sealing, dosing and stability of the contents over time.

The packaging can be reused provided basic hygiene principles are observed and the packaging is not visibly damaged. Before each new filling, the bottle and the dispenser must be thoroughly cleaned and disinfected, ideally using a suitable alcohol, for example isopropyl alcohol or plant-based ethanol. After applying the disinfectant, allow all parts to dry completely so that moisture does not accumulate inside the packaging. When switching to another type of product (for example from an oil-based to a water-based product), we recommend using the packaging only if you are sure that no residues of the original product or odour remain.

The dispenser should be cleaned gently to avoid mechanical damage to the delicate parts of the pump. After the contents have been used up, rinse the inside of the system with warm (not boiling) water, optionally with a mild, non-aggressive cleaning agent, and then pump clean water through the mechanism several times. Then apply a suitable disinfectant alcohol and pump the dispenser again so that the disinfectant reaches the entire system. Finally, allow the individual parts to dry freely at room temperature and store the dispenser assembled only after it has completely dried.

Before recycling, it is advisable to empty the packaging thoroughly and remove any product residues. The sorting method is determined by the material specified in the product parameters – according to this you will place the packaging in the appropriate type of sorted waste (for example a plastic package in the container for plastics). If the bottle is made from a combination of several materials, it is recommended, where possible, to separate the individual parts (bottle body, dispenser) and sort them separately. Information on the specific material composition can be found in the product parameter table on the packaging page, which can then be used to choose the correct recycling procedure.

When selecting suitable packaging, you can use the advanced filter available at the top of the page after clicking on the relevant packaging material category. In the advanced filter you can easily narrow down the offer according to key parameters such as neck type, size, colour or packaging material. In this way you can select a bottle, pharmaceutical bottle or jar that best matches the consistency of your product, the intended method of dispensing and the visual style of your brand.