NEW PRODUCTS in the offer.
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with a transparent spray pump represents a practical and reliable packaging for fine dispersion of cosmetic and cleaning preparations. Thanks... read more
1,15 € incl. VAT
The plastic bottle with a transparent spray pump represents a practical and reliable packaging for fine dispersion of cosmetic and cleaning preparations. Thanks to the PET material and the precise spray mechanism, it is suitable for filling products where even application in a thin layer and comfortable dosing without contact with the contents is important.
The packaging is designed to provide stability, good shape retention and visual control of the contents. In combination with the spray pump with a shiny silver ring, it has an aesthetic and professional appearance, so it is also suitable for branded or gift packaging. The PET material at the same time reduces the risk of breakage compared with glass and makes handling easier for both home and professional production.
This bottle is a standalone packaging that is supplied on Handymade.sk with a specific type of spray pump. Within the same category, however, there are also other bottles made of PET material that are compatible with various types of closures and dosing systems (for example screw caps, droppers, spray pumps or practical applicators) according to the parameters selected directly for the products. The combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend performing your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation).
All technical parameters of the packaging are given in the attached Packaging Quality Certificate and in the product parameters.
You can use the PET bottle repeatedly if you follow hygiene principles. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with a suitable alcohol solution, for example IPA 99% isopropyl alcohol or ethanol 96% denatured plant-based. This reduces the risk of microbial contamination and of affecting the stability of the new preparation.
Before repeated use, we recommend first rinsing the bottle with a suitable cleaning solution or with warm water and a mild detergent, rinsing thoroughly with clean water and allowing it to drain. Then rinse the inner surface of the packaging and the spray mechanism with disinfecting alcohol, for example IPA 99% isopropyl alcohol or 96% plant-based ethanol. After disinfection, allow the packaging to dry naturally at room temperature.
The PET material should not be exposed to high temperatures, because with long-term or intensive heat exposure there is a risk of deformation of the packaging and deterioration of the spray pump functionality. We do not recommend washing the bottle in a dishwasher, boiling it or sterilising it at high temperatures. For cleaning, it is better to choose lukewarm water, a mild cleaning agent and subsequent disinfection with alcohol according to the recommendations.
If you decide not to reuse the packaging, we recommend recycling it according to the type of material stated in the product parameters. PET bottles are usually sorted into the container intended for plastic waste. Before throwing it away, remove any product residues, rinse the bottle and, if possible, separate the individual parts (bottle, spray pump) according to local sorting rules. Details about the material composition can be found in the parameter table for the respective product on Handymade.sk.
The spray bottle is most suitable for low-viscosity, predominantly aqueous or water-alcohol preparations that need to be applied in the form of a fine mist. These are primarily floral waters, toners, body refreshers, interior and textile sprays, light hair products and gentle cleaning solutions. Thick emulsions, gels or oils with high viscosity can reduce the functionality of the spray pump.
When choosing suitable packaging, we recommend using the advanced filter in the packaging categories on Handymade.sk. After clicking on the selected category, a filter will appear at the top of the page where you can sort products according to important parameters such as neck type, size, colour and material. Thanks to this, you will quickly find the combination of bottle, closure or spray pump that will meet your specific formulation and visual requirements.
