The bottle can be reused if basic hygiene principles are observed. Before each new filling, the packaging must be thoroughly cleaned and disinfected, ideally using suitable alcohol-based disinfectants, such as isopropyl alcohol or ethanol. For this purpose you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Disinfection helps to reduce the risk of microbial contamination and extend the stability of your product.

Before reuse, it is advisable to rinse the bottle with the remains of the original product, then wash it with a mild cleaning agent compatible with the given type of plastic and rinse thoroughly with drinking water. After drying, we recommend disinfecting the inner surface and thread with an alcohol solution, for example using the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Before filling, the packaging should be completely dry and free of residues of cleaning agents.

Plastic packaging of this type is not intended for exposure to high temperatures. When in contact with hot water, steam or during prolonged heating, undesirable deformation of the shape and weakening of mechanical stability may occur. For this reason, washing in a dishwasher, boiling or sterilization at high temperatures is not recommended. For cleaning it is appropriate to use lukewarm water, a gentle cleaning agent and subsequent disinfection with alcohol.

If you decide not to reuse the packaging, its recycling is recommended in accordance with the information on the material given in the parameter table of the specific product on the Handymade.sk website. Before placing it in sorted waste, it is advisable to remove any product residue and, if necessary, separate different materials (for example, a closure made of another plastic or metal) to facilitate sorting. Then place the bottle in the container intended for the given type of plastic according to the locally applicable waste sorting rules.

The simplest way is to use the advanced filter in the packaging categories. After clicking on the relevant category (for example bottles, jars or dropper bottles), you will find the filter at the top of the page. Using it, you can clearly sort the offer according to parameters such as neck type, size, colour or material used. By combining the individual filters, you will quickly choose the packaging that best matches the planned product type, design and method of application.

When choosing a closure, the decisive factors are the compatibility of the neck, the type of product and the desired method of application. For low-viscosity liquids, classic screw caps, droppers or fine sprayers are suitable, whereas for more targeted application, special applicators can be practical. On Handymade, combinations of packaging and closures that have been mutually tested are available; nevertheless, we always recommend carrying out your own test – to verify sealing, dosing and the behaviour of the material in contact with the specific formulation.