The dispenser can be reused if strict hygiene principles and appropriate handling are observed. Before each new filling, we recommend cleaning the packaging and the dosing mechanism as thoroughly as possible and then disinfecting them with a suitable agent, for example with isopropyl alcohol or denatured plant-based ethanol. This reduces the risk of microbial contamination and extends the safe usability of the contents.

The dispenser is ideal for liquid and slightly viscous preparations such as facial and body lotions, hand creams, cleansing gels, shampoos, conditioners, massage and body oils, or working solutions used in salons and workshops. Before fitting, we recommend trying the dosing with a smaller amount of product to verify the appropriate viscosity and smooth operation of the pump.

First, it is appropriate to rinse the dispenser mechanically with lukewarm water and a mild cleaning agent, and it is advisable to pump the solution through the mechanism several times. Then we recommend treating the surface and the inner part, as far as possible, with a disinfectant, for example using IPA 99% isopropyl alcohol or 96% denatured plant-based ethanol. After disinfection, let all parts dry thoroughly in a clean place protected from dust and only then use the dispenser again.

The basis is the same neck type between the bottle and the dispenser, which you will find in the parameters of each product. On the website you can display bottles with the same neck type and easily combine them with this dispenser. For each new combination, we recommend performing a sealing test, turning the filled container upside down and checking for leakage, as well as testing the dosing with several presses to verify smooth operation and an appropriate amount per dose.

Before recycling, we always recommend removing any remaining contents as well as possible and separating the individual parts of the packaging from each other (bottle, closure or dispenser). The sorting method is governed by the material specified in the parameter table for the specific product on the website, according to which you assign the individual parts to the appropriate container for sorted waste. If you do not want to use the packaging repeatedly, it is appropriate to rinse it first, let it dry and only then hand it over for recycling, thereby contributing to efficient processing of the material.

The simplest way to choose is to use the advanced filter, which you will find at the top of the page after clicking on the relevant packaging material category. Using the filter, you can sort the offer according to neck type, size, colour and material, and thus narrow the selection only to packaging that corresponds to your intention. Thanks to this, you can easily find a suitable combination of bottle, dispenser or closure exactly for your specific product.