PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Lotion Pump With Overcap, Glossy Gold, 200 ml
Pack size100 ml150 ml200 ml300 ml
A clear PET bottle with a capacity of 200 ml and a pump with overcap in white and gold make up ready-to-use packaging for liquid and semi-liquid cosmetic products that are used in small doses. full description
Lowest price in the last 30 days: €1.41
Total for 1 pcs: €1.41
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a capacity of 200 ml and a pump with overcap in white and gold make up ready-to-use packaging for liquid and semi-liquid cosmetic products that are used in small doses. One press releases a measured amount, your fingers do not come into contact with the rest of the contents, and the product in the bottle stays protected from impurities. The clear plastic shows the colour of the product and how much of it is left. The bottle is light and unbreakable, so it is suitable for the bathroom, the shower and for travel. The whole set is declared suitable for contact with cosmetic products.
What it is suitable for
The pump draws the contents up through a dip tube from the bottom of the bottle and handles liquid to medium-thick textures. Thick creams, butters and products that solidify when cooled do not belong in the pump, as the dip tube will not draw them up.
- Liquid soaps and shower gels – dispensing straight into the palm without unscrewing the closure, so the contents do not spill.
- Body lotions and facial emulsions – lighter to medium-thick O/W emulsions are dispensed evenly, without fingers getting into the bottle.
- Shampoos and liquid conditioners – the bottle can be operated with one hand, even a wet one.
- Serums and liquid toners – a small dose per press suits products of which only a little is needed per use.
- Body and massage oils – the pump makes measuring easier and limits spills.
Dispensing and overcap
One full press releases approximately 0.2 ml of product. This is an advantage for serums, while for liquid soap or shampoo you should expect several presses per dose. The overcap protects the pump head from dust and from accidental pressing in a bag, so put it back on after use. The pump is made of polypropylene and aluminium, and the white and gold design complements the clear bottle and suits both light and darker contents.
After screwing on a new pump, press it several times to prime it until the dip tube and mechanism fill with the product. Only then will it start to dispense the full amount.
Capacity and filling
The nominal capacity of 200 ml is the amount the bottle is intended for under normal filling. The brimful capacity is the physical volume up to the neck, and you will find it in the parameters. The difference between the two values is a reserve for the dip tube and the pump mechanism, and also space for the contents to expand when the temperature changes. Fill up to the nominal capacity, not to the brim, otherwise the contents will be pushed out through the neck when you screw on the pump.
Fill emulsions, gels and soaps only once they have cooled down. The hot phase from emulsification does not belong in a PET bottle.
Good to know
- Light – clear plastic does not protect the contents from light. Store products with sensitive ingredients, for example vitamin C, plant dyes or a higher proportion of essential oils, away from direct sunlight, or choose dark packaging for them.
- Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Pump clean water through the pump and let it drain.
- Alcohol, solvents and essential oils – for products with a higher content of alcohol, solvents or pure essential oils, we recommend testing a small amount first to check that the packaging does not change in appearance and that the pump continues to seal.
- Reuse – both the bottle and the pump can be used again after thorough cleaning. When switching to a different formulation, check that no residues of the original product have remained in the mechanism.
- Contact with food – the set has no declaration for contact with food and is intended for cosmetic products.
- Other closures – the bottle has a 24/410 neck finish, and you will find closures with the same neck type as well as ready-made combinations in the Handymade range. If you make your own combination, check the sealing and dispensing with your specific formulation.
- Recycling – the bottle is made of PET, and the pump combines polypropylene and aluminium. Before disposal, unscrew the pump from the bottle and sort the two parts separately.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































