PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Lotion Pump With Overcap, Glossy Gold, 100 ml
Pack size100 ml150 ml200 ml300 ml
A clear bottle with a pump for serums, light emulsions, face and body lotions or oil blends, where you want to dispense the contents in small amounts without unscrewing the cap. full description
Lowest price in the last 30 days: €1.18
Total for 1 pcs: €1.18
Quantities add up across all combinations of this bottle.
Product description
A clear bottle with a pump for serums, light emulsions, face and body lotions or oil blends, where you want to dispense the contents in small amounts without unscrewing the cap. Clear PET shows the colour and the amount of product left, and the bottle is lightweight, so you can take it with you when travelling. The pump in a white and gold finish gives homemade cosmetics the look of a finished product from the shelf.
The set consists of a 100 ml bottle and a plastic pump with an overcap, both with the same neck finish. The two parts are matched to each other and you do not need to buy anything else. Both the bottle and the pump are declared as suitable for contact with cosmetic products, and the declaration of conformity is available with the product. The set as a whole is intended for cosmetics.
What the set is suitable for
- Serums and fluids – a small dose per press corresponds to the usual amount applied to the face.
- Face and body lotions – the pump draws up thinner emulsions without difficulty, and your fingers do not come into contact with the contents of the bottle during use.
- Oil serums and facial oils – the clear bottle shows the colour of the oil, and the pump prevents spillage.
- Samples and travel packs – 100 ml holds enough product for several weeks of use.
Thicker creams, butters and products with solid particles (scrubs, granules) will not pass through the pump or will clog it. A jar or a bottle with a wider neck is more suitable for them.
Dispensing and handling the packaging
The pump works by pressing the head, and one press dispenses approximately 0.2 ml. When using it for the first time, press the head several times without product until the dip tube fills and the contents start to come out. The overcap protects the pump head from dust and accidental pressing during transport, and it is put back on after use.
The dip tube of the pump is longer than the height of the bottle. Before first assembly, shorten it with a sharp knife or scissors so that it reaches just above the bottom of the bottle. This allows almost all of the contents to be used.
Fill the bottle up to the nominal volume of 100 ml, not to the brim. The dip tube and the pump head need the space above the liquid level, otherwise the contents will overflow when the pump is screwed on.
The nominal volume is the volume the bottle is designed for under normal filling. The total brimful volume, stated in the parameters, is the physical volume up to the neck. The difference between them is a reserve for the pump and for the expansion of the contents when the temperature changes.
Good to know
Clear plastic does not protect the contents from light. Formulations with light-sensitive ingredients, for example with vitamin C, retinol or oils prone to oxidation, are better kept in a dark bottle or in a cabinet away from the sun.
The bottle is intended for cosmetics, that is water-based and emulsion products as well as common vegetable oils. For formulations with a higher proportion of essential oils, alcohol or solvents, we recommend checking in advance that the wall of the bottle does not turn cloudy or soften. Hot contents do not belong in PET; emulsions and gels are filled only after they have cooled to room temperature.
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. The inside of the dip tube is cleaned by pumping through clean water and then alcohol until clean liquid comes out of the head.
After washing, leave the pump to dry thoroughly on the inside as well. Residual water in the dip tube can dilute the first doses and shorten the shelf life of an unpreserved product.
If you want to use the bottle with a different closure, choose according to the neck finish stated in the parameters. Closures sold separately and other ready-made combinations can be found in the Handymade range. For your own combination, we recommend checking the tightness and the behaviour of the closure with your specific formulation.
The bottle is made of PET, and the pump of polypropylene with an aluminium element. When recycling, separate the pump from the bottle, as it is a combination of materials.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 100 ml, without cap
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































