PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Spray With Glossy Silver Collar, 150 ml
Pack size100 ml150 ml200 ml300 ml
The set of a clear plastic bottle with a white mini trigger sprayer and a glossy silver collar is intended for filling with thin cosmetic products applied by spraying: face and hair toners, hydrosols , refreshing body… full description
Lowest price in the last 30 days: €1.28
Save €0.01 with this set
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
The set of a clear plastic bottle with a white mini trigger sprayer and a glossy silver collar is intended for filling with thin cosmetic products applied by spraying: face and hair toners, hydrosols, refreshing body sprays or hair styling sprays. The PET bottle is lightweight and does not break if dropped. The clear wall lets you see the contents and their level, so you can tell how much product is left. The sprayer with a 24/410 neck finish fits the bottle neck, and the silver collar gives the packaging a finished look without any further decoration.
The nominal volume of the bottle is 150 ml. Both parts of the set, the bottle and the sprayer, are declared as suitable for contact with cosmetic products; you will find the declaration of conformity with the product. The set is not intended for contact with food. It is suitable for cosmetics, including homemade ones.
What the set is suitable for
The mini trigger sprayer only disperses liquids with a low viscosity, close to that of water. It works best with:
- Face and body toners – water-based solutions with active ingredients, glycerine or plant extracts, applied to the face, décolletage or body by spraying.
- Hydrosols – pure or blended, to refresh the skin during the day or as a toner after cleansing.
- Hair sprays – detangling sprays, leave-in conditioner sprays, and salt or protein sprays on a thin base.
- Refreshing and scented body sprays – water-based or water-alcohol bases with solubilised fragrance.
A thick serum, body lotion, gel or vegetable oil will not pass through the sprayer, or it will squirt in a stream instead of a mist. For such products we recommend a bottle with a pump.
How the set dispenses and seals
The sprayer draws the contents up through a tube and releases approximately 0.12 ml of fine mist with a single press. The small dose suits toners and face sprays, where the product is applied in a thin layer and does not run. With hair sprays, expect to press several times per use.
The 24/410 neck finish on the bottle and on the sprayer is the same, so the set only needs to be tightened by hand. We recommend testing how the closure behaves with your specific formulation before a larger production run. Leave the filled bottle to stand for several days, including lying on its side, and check that the contents do not leak around the thread and that the sprayer still sprays evenly after a break.
The sprayer tube is longer than the height of the bottle requires. If it bends at the bottom and prevents proper tightening, shorten it with a diagonal cut so that it ends just above the base. The diagonal cut prevents the end of the tube from sticking to the base.
Filling and volume
The nominal volume is the amount the bottle is designed for in normal filling. The total volume up to the neck is larger, and the difference provides room for the sprayer tube, for the air above the liquid and for the expansion of the contents when the temperature changes. The bottle is therefore filled only up to the nominal volume. If you fill it up to the neck, the contents will overflow when the sprayer is screwed on and the thread will stay wet, which impairs the seal.
Before the first filling, wash the bottle and the sprayer, rinse them with isopropyl alcohol or ethanol and leave them to dry completely. After disinfection, spray clean water through the sprayer several times and then the product itself, so that any alcohol residues are flushed out of the tube.
Good to know
- Light – clear PET does not protect the contents from light. Products with essential oils, natural dyes or light-sensitive active ingredients are better suited to amber or blue glass; alternatively, store the set away from direct sunlight.
- Heat – PET is filled with cooled contents. A hot liquid may deform the bottle.
- Alcohol and essential oils – for products with a high proportion of alcohol, pure essential oils or solvents, we recommend testing the behaviour of the bottle and the sprayer on a small amount first. Most water-based toners and hydrosols pose no problem for the plastic.
- Reuse – the set can be used again after washing and disinfection. If the sprayer dries out after standing for a longer time or stops dispensing evenly, replace it; you can continue to use the bottle.
- Recycling – the bottle is made of PET and the sprayer of PP with an aluminium collar. Before disposal, unscrew the set and sort the parts by material.
Always check before filling that the contents are thin enough. Pigment residues, undissolved powder ingredients or sediment from extracts will clog the sprayer and impair dispensing.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 150 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































