Yes, the packaging can be repeatedly used in normal use, provided that you follow basic hygiene principles. Before each new filling, the bottle and the dispenser must be thoroughly cleaned and subsequently disinfected with a suitable preparation, for example using isopropyl alcohol IPA 99 % or ethanol 96 % denatured. For disinfection you can use the products IPA 99 – isopropyl alcohol or Ethanol 96 % denatured plant-based. When using repeatedly, always check the condition of the plastic and the functionality of the dispenser.

First remove the residues of the previous product and rinse the packaging with suitable clean water or a compatible cleaning solution. Subsequently we recommend using a disinfectant alcohol – for example IPA 99 – isopropyl alcohol or Ethanol 96 % denatured plant-based – with which you rinse the inside of the bottle and, as needed, also treat the dispenser. After disinfection, let the packaging dry thoroughly at room temperature, away from direct heat and open flame, and only then fill it again.

If you decide not to use the bottle and the dispenser repeatedly, we recommend recycling them in accordance with local waste sorting rules and the information given in the parameter table at the product. Before discarding, always remove the remaining contents and, if possible, separate the individual parts of the packaging (bottle body, dispenser, possibly tube) according to the type of material. Then place them in the appropriate container intended for the given type of plastic. In this way you will support more efficient processing of the packaging material and a reduction of waste.

Thanks to the integrated dispenser, the packaging is suitable primarily for low-viscosity to medium-viscosity liquids, such as light emulsions, body milks, gels and liquid preparations for hands or body. With very thick formulations, dosing may be less smooth, therefore we recommend always making a trial filling and testing whether the dispenser corresponds to the desired mode of application of your specific product.

To select the right packaging, you can use the advanced filter, which you can find at the top of the page after clicking on the relevant packaging category. In the advanced filter you can narrow down the offer according to several parameters – especially according to the type of neck, size, colour and packaging material. In this way you can easily search for bottles, jars, dropper bottles or other containers that best correspond to your formulation and the intended way of use.