The packaging can be reused if basic hygiene rules are observed. Before each new filling we recommend thoroughly cleaning the bottle and the sprayer and then disinfecting them with a suitable alcohol solution, for example using the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured vegetable. Only after complete drying is the packaging ready for further use.

First we recommend rinsing the packaging with warm water and a gentle detergent and then rinsing it thoroughly with clean water. After drying, it is advisable to spray or rinse the inner surface and the parts of the sprayer with disinfecting alcohol (for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured vegetable). Then all parts must be allowed to dry completely at room temperature to avoid dilution of or impact on your formulation by residues of water or alcohol.

The plastic material used for this bottle is not intended for long‑term exposure to high temperatures. Boiling, sterilisation with boiling water and washing in a dishwasher are not recommended, because at higher temperatures the packaging may gradually deform and its mechanical properties may change. For regular cleaning, manual care combined with subsequent disinfection with alcohol at room temperature is suitable.

Before recycling it is advisable to empty the bottle and rinse it as well as possible so that no residues of the original contents remain. Then the plastic container is sorted according to the recycling symbol given in the product parameters – on this basis you place it in the appropriate container for sorted waste. The sprayer and smaller plastic components can be recycled in the same way according to the material marking. If you are unsure about local rules, follow the recommendations of your waste collection service provider. By recycling instead of simply throwing it away, you help reduce the amount of plastic waste.

When choosing a suitable bottle we recommend using the extended filter in the packaging material categories. After clicking on the selected category, the extended filter is located at the top of the page and allows clear filtering by parameters such as neck type, size, colour or packaging material. Thanks to this you can quickly narrow down the offer to packaging that matches your technical and design requirements.

The sprayer is ideal for liquid formulations with low to medium viscosity where a fine and even spray is required – for example facial and body sprays, hair toners, aromatherapeutic and interior blends or light cleaning solutions. Before filling thicker emulsions or oil blends we recommend a trial filling to verify the smooth operation of the sprayer and the appropriate droplet size during dosing.