The bottle can, with appropriate handling, be used repeatedly, but we always recommend adhering to strict hygiene rules. Before each new filling, it is necessary to thoroughly clean the packaging and the spray dispenser and then disinfect them with a suitable alcohol-based preparation, for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after complete drying and evaporation of the alcohol is the bottle ready for further safe use.

Before new use, it is advisable to rinse the bottle with warm water and a mild cleaning agent, rinse thoroughly with clean water and allow it to dry. We then recommend disinfecting the inner surface and the thread with an alcohol solution, for example using isopropyl alcohol or plant-based ethanol. For the spray dispenser, it is advisable to press the mechanism several times with the cleaning solution and then with the disinfecting solution so that the inner channel part is also rinsed through. After complete drying, the packaging can be filled again.

If you decide not to use the packaging further, we recommend recycling it according to the information given in the parameter table for the product. Follow the recycling symbol and material marking on the packaging; place the empty and, if possible, rinsed bottle into the appropriate sorted waste according to local collection rules (for example, a container for plastics for plastic execution). The spray dispenser mechanism should be disposed of according to the instructions for mixed or sorted waste, depending on its construction and the local collection system. Before discarding, it is advisable to remove any product residues in order to facilitate recycling.

The bottle with spray dispenser is ideal for liquid products with low to medium viscosity, where even application in a thin layer is important. In practice, it is often used for facial and body sprays, hydrolats, hair tonics, care sprays for textiles, interior fragrances or mild cleaning solutions for surfaces. Before filling, we recommend testing whether the specific formulation does not clog the nozzle and whether the spraying remains smooth and even.

To make selection easier, we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. Thanks to the filter, you can sort products according to parameters such as type and neck diameter, size, colour or packaging material. By combining these criteria, you can quickly select bottles, jars, dropper bottles or other packs that best match your formulation and the required dosing method.