Yes, the bottle can be used repeatedly if hygiene rules are followed, especially for your own DIY cosmetic and technical solutions. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with a suitable alcohol‑based preparation, for example the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. In this way you reduce the risk of microbial contamination and impact on the stability of the subsequent formulation.

Before further use, we recommend disassembling the bottle into its individual parts (glass body and sprayer), rinsing the glass container with warm water and a mild detergent and rinsing thoroughly. After drying, apply disinfection with a suitable alcohol, for example using the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. The sprayer itself should be flushed through with an appropriate amount of alcohol and then clean water, pressing the mechanism several times so that the solution reaches the entire system.

If you decide not to use the bottle repeatedly any more, we recommend recycling it in accordance with the separate‑collection rules indicated in the parameters section on the product page. The glass body standardly belongs in the container designated for glass, while the plastic and metal parts of the sprayer should be separated and placed in the appropriate sorted‑waste stream according to local rules. Before handing over for collection, the pack should be emptied as much as possible and ideally rinsed free of product residues.

The sprayer is most suitable for low‑viscosity to medium‑viscosity liquids that need to be dispersed in a fine layer – for example toners, hydrosols, skin refreshers, room sprays, water‑based and lightly oil‑based blends. With thicker creamy emulsions or gel products, the spraying function may deteriorate, so it is always advisable to test the real behaviour of your specific formulation in advance.

To make selection easier, you can use the extended filter located at the top of the page after clicking on a specific packaging category. Using the filter, you can clearly narrow down the offer according to neck type, size, colour and material, and thus choose a bottle or other container that best matches your product and method of application. We recommend combining several filters at once to obtain the most accurate selection of suitable packs.