Yes, the packaging can be reused if hygienic principles are observed. Before each new filling, we recommend thoroughly cleaning the bottle and then disinfecting it with a suitable alcohol‑based product, for example isopropyl alcohol (IPA 99 % isopropyl alcohol) or plant‑based ethanol (Ethanol 96 % denatured plant‑based). This minimises the risk of microbial contamination and any impact on the stability of the new formulation.

After use, it is advisable to disassemble the dispenser to the extent allowed by the product and rinse it with lukewarm water and a mild cleaning agent. We then recommend rinsing with clean water and briefly spraying or pumping through an alcohol‑based disinfectant solution. Once completely dry, the dispenser can be re‑mounted on the vial. When cleaning, it is important to avoid aggressive solvents that could damage the seals or plastic parts of the mechanism.

If you decide not to reuse the packaging, we recommend recycling it according to the material composition specified in the product parameters. The glass bottle can generally be placed, after emptying and basic rinsing, into the container for sorted glass, while the plastic dispenser should be separated according to the type of plastic or handed over as mixed plastic waste if local rules do not allow more detailed sorting. Before handing it over for recycling, remove any residue of the contents so as not to burden the recycling facility and to maintain the quality of the recycled material.

Dark glass is particularly practical for preparations that are sensitive to light, such as certain oils, extracts, serums or active solutions. Suitability for a specific formulation also depends on its composition (pH, alcohol content, type of solvents). For less common or highly concentrated blends, we recommend performing a trial filling and monitoring any changes in the appearance, scent or viscosity of the product over time to verify full compatibility of the contents with the packaging.

For easier selection, we recommend using the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. With the help of the filter, you can sort packaging according to key parameters such as neck type, size, colour and material. By combining these criteria, you can quickly narrow down the range to the packaging that best matches the desired product type and dosing method.