The oil dispenser is designed for common cosmetic oils and oil serums. In the case of very thick or highly viscous blends, we recommend carrying out a trial filling of a smaller amount before full filling and testing whether the dosing proceeds smoothly and without excessive pressure. Depending on the test result, you can adjust the composition or choose another type of applicator.

The glass bottle can be reused, provided hygienic principles are observed, also for different types of oil formulations. Before each new filling, the packaging must be thoroughly cleaned and disinfected, ideally using a suitable alcohol, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. After cleaning, allow both the packaging and the dispenser to dry completely in order to minimise the risk of microbial contamination and dilution of the product by residual water.

We recommend filling the bottle using a small funnel or a dosing syringe to avoid contaminating the neck and the thread. When filling, leave a certain free space below the top edge so that the dispenser has enough room for proper placement and sealing. After filling, carefully clean the thread and the area around the neck, screw the dispenser on firmly and, before first use, press several times until the system is filled and starts dispensing a consistent amount of product.

If you decide not to reuse the packaging, it is appropriate to recycle it in accordance with local waste-sorting rules and the information given in the product parameters. The glass part of the bottle, after being emptied and rinsed, is usually placed in the container designated for glass, while the plastic and metal parts of the dispenser are typically sorted as mixed or plastic waste according to the recommendations of your collection system. Before disposal, we recommend removing any remaining contents from the packaging to facilitate its further processing in the recycling process.

The simplest way to select a suitable bottle, vial or jar is to use the advanced filter in the packaging categories. You can find the advanced filter at the top of the page after clicking on the relevant category (for example glass bottles, plastic packaging, jars). In it, you can conveniently filter by neck type, size, colour and material, thanks to which you will quickly find packaging that suits your formulation, dosing method and brand design.