Yes, the glass vial can be used repeatedly if hygiene principles are observed. Before each new filling, the packaging must be thoroughly cleaned and disinfected, ideally using a suitable alcohol, for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After cleaning, allow the bottle and any closure to dry completely, and only then fill it again to minimize the risk of microbial contamination.

The glass vial is most suitable for packaging concentrated cosmetic preparations such as facial and eye serums, intensive local treatments, dermal solutions, oil blends and small quantities of professional formulations. Thanks to the dosing system with applicator, it enables precise and hygienic application even with highly effective and sensitive active ingredients.

First remove residues of the original contents from the bottle by mechanically rinsing with a suitable medium (for example a small amount of water or oil, depending on the type of product). Then disinfect the packaging using alcohol such as IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After treatment with alcohol, allow the vial and the closure to air dry at room temperature. Only after completely drying is the packaging ready for another safe filling.

If you decide not to reuse the packaging, we recommend recycling it according to the type of material specified in the product parameters. The glass part can usually be placed in the container intended for glass after coarse removal of product residues. Any plastic or metal parts of the closure should be separated and sorted into the appropriate collection containers, if the local waste collection system allows it. Always follow the local sorting rules and the information in the parameter table at the product on the Handymade website.

The simplest way is to use the advanced filter in the packaging category. After clicking on the relevant category, the advanced filter is located at the top of the page and allows you to narrow down the selection according to key parameters such as neck type, size, colour and packaging material. This way you will quickly find bottles, vials, jars or other containers that are most suitable for the specific type of product and method of application.

Before filling a new formula, we recommend always verifying the compatibility of the packaging with the formulation using a small test amount. Pay particular attention to the sealing of the closure, the accuracy and smoothness of dosing, the stability of the colour and fragrance of the product in contact with the glass and any plastic parts of the closure. Also check whether the method of application (dropper, applicator, sprayer) corresponds to the viscosity and type of the final product.