+421 950 333 113info@handymade.store−10 %Shop now

ACTIVE INGREDIENTS

Sodium Hyaluronate Crosspolymer, 50 g

Pack size10 g50 g100 g500 g

HA crosspolymer (Sodium Hyaluronate Crosspolymer) is crosslinked hyaluronic acid supplied as a ready-made clear gel . full description

AvailabilityIn stock · 19 packs
Product codeAD092_50
BatchT26011001
Best before01/2028
€49.49incl. VAT€989.80/kg

Lowest price in the last 30 days: €49.49

Product description

HA crosspolymer (Sodium Hyaluronate Crosspolymer) is crosslinked hyaluronic acid supplied as a ready-made clear gel. On the skin it hydrates for longer than regular hyaluronic acid, and in a formulation you simply weigh it out and mix it in, with no dissolving and no waiting for it to swell. It belongs in products for hydration, skin elasticity and mature skin care.

It is suitable for facial, body and hair cosmetics: serums and creams as well as shampoos and shower gels. It is obtained biotechnologically, by fermentation.


How it differs from hyaluronic acid powder

Regular hyaluronic acid in powder form is sodium hyaluronate with linear chains. In HA crosspolymer the chains are linked together into a network, crosslinked, and it is supplied as a ready-made gel.

The main difference is in the effect. The network binds water and releases it to the skin gradually. On the skin surface it forms a hydrating film that breaks down more slowly than linear chains, so the hydration lasts longer. It works on the surface of the skin and does not penetrate into deeper layers.

Working with the raw material also differs. The powder takes patience. It swells quickly in water and forms lumps if added all at once. It is sprinkled in gradually while stirring, or left to swell overnight on the surface of the water, or first mixed with glycerine. The gel does not need these steps. You weigh it out and mix it into the water phase or into an emulsion cooled below 40 °C.

The usage rate differs as well. The powder is used at 0.05–0.5% in the product, the gel at 1–10%. This is because the gel is mostly water and contains only 1–10% of the crosslinked hyaluronate itself.

When you replace the powder with HA crosspolymer gel in a finished formulation, do not convert the dose from the percentage of powder. Start from the recommended 1–10% of gel and check the result on a small batch.


What it is used for

  • Longer-lasting hydration – as a humectant it binds water and releases it to the skin gradually, in facial and body products for dry skin and all skin types.
  • Skin elasticity and mature skin – it belongs in anti-ageing products that focus on skin elasticity and the appearance of wrinkles.
  • Skin barrier and regeneration – it is used in regenerating facial and body products.
  • Tolerates surfactants – anionic, amphoteric and non-ionic, at acidic and neutral pH.

Use in a formulation

The gel belongs in the water phase or in an emulsion during the cooling phase, once the temperature drops below 40 °C. It is water-dispersible. The recommended usage rate is 1–10% in the finished product, whose pH should be in the range 4–8. The raw material itself has a pH of 5.0–7.5.

It works in leave-on products such as serums, creams, body lotions and hair serums, as well as in rinse-off products, for example shampoos, shower gels and bath products.


Suitable for products such as

  • Hydrating serums and gel serums for the face
  • Face creams and emulsions for dry, sensitive and mature skin
  • Facial toners and masks
  • Body lotions and body gels
  • Conditioners and leave-on hair serums
  • Shampoos, shower gels and bath products

Good to know

The gel consists of water (87–97%), crosslinked sodium hyaluronate (1–10%), Pentylene Glycol (2–5%) and Caprylyl Glycol (0.01–1%).

A product with a water phase must be preserved. Check the compatibility of your chosen preservative with the formulation by means of a stability test.

Store in a cool place, in a tightly closed container, protected from light and heat. The raw material is not classified as hazardous under the CLP regulation.


Frequently asked questions

What is the difference between HA crosspolymer and hyaluronic acid powder?
The main difference is in the effect. HA crosspolymer (Sodium Hyaluronate Crosspolymer) is crosslinked sodium hyaluronate that forms a hydrating film on the skin and breaks down more slowly than the linear chains of hyaluronic acid powder, so it hydrates for longer. It is supplied as a ready-made gel that does not need dissolving. The gel is used at 1–10%, the powder at 0.05–0.5%.
How do you add HA crosspolymer to a cream?
Add the gel to the emulsion during the cooling phase, once the temperature drops below 40 °C, at 1–10% of the finished product. Weigh it out and mix it in directly, without dissolving. The finished cream should have a pH of 4–8, and we recommend checking the pH and stability after incorporation.
Can HA crosspolymer be used in a shampoo or shower gel?
Yes. The gel tolerates anionic, amphoteric and non-ionic surfactants and acidic and neutral pH, and it is also intended for cleansing and hair products. In a shampoo or shower gel it is added to the water phase below 40 °C, at 1–10%.
Is HA crosspolymer suitable for an anhydrous product?
No. HA crosspolymer is a water-based gel, with water making up 87–97% of the raw material, and it is incorporated into the water phase or into an emulsion. It is not suitable for oil serums, balms and other anhydrous products.
Is HA crosspolymer suitable for sensitive skin?
Yes, the raw material is intended for sensitive, dry and mature skin and for all skin types. It does not contain fragrance allergens, parabens, silicones or PEG. The tolerance of the finished product depends on the whole formulation and is assessed for the product as a whole.

Parameters

INCI
Aqua, Sodium Hyaluronate Crosspolymer, Pentylene Glycol, Caprylyl Glycol
CAS No.
7732-18-5, 105524-32-1, 5343-92-0, 1117-86-8
Product colour
Colourless
Country of origin
China
Processing method
Fermentation
Function in formulation
Active ingredientHumectant
Recommended processing temperature
< 40 °C
Application area
FaceHairBody
Recommended usage rate
1 – 10 %
Recommended formulation pH range
4 – 8
Application type
Leave-onRinse-off
Natural Index (NI ISO 16128)
0,90
Natural Origin Index (NOI ISO 16128)
0,95

Product documentation

CoACertificate of Analysis
batch T26011001PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.