+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

COSMETIC CLAYS

Ultra Ventilated Green Illite Cosmetic Clay 1 kg

Pack size100 g500 g1 kg5 kg

French green clay is a natural mineral clay that binds excess sebum, impurities and odours on the skin and in the hair. It consists mainly of illite, complemented by kaolin and montmorillonite. full description

AvailabilityIn stock · 16 packs
Product codeKIL029_1000
Batch4825BI
Best before10/2031
€18.29incl. VAT€18.29/kg

Lowest price in the last 30 days: €16.46

Product description

French green clay is a natural mineral clay that binds excess sebum, impurities and odours on the skin and in the hair. It consists mainly of illite, complemented by kaolin and montmorillonite. It is used mostly in masks, cleansing products and shampoos for oily and problem skin and for hair prone to oiliness.

The ultra ventilated grind grade means a very fine powder that disperses evenly in the product.


How it works on the skin and in the hair

Clay works on the surface. Its particles bind both water and oil, so they draw sebum, and with it impurities, from the skin. After the mask is rinsed off, the skin looks more matte and cleaner. It works the same way on the scalp and in hair that gets oily quickly.

Its second property is odour absorption, which is put to use in deodorants.


What ultra ventilated means

The designation describes particle size. In this clay, 90% of particles are smaller than 30 µm, which places it among the fine fractions.

The fineness shows in the texture. A mask or cream made with finely ground clay is smooth, free of grains, and spreads evenly. The abrasive effect is mild.

The clay is processed mechanically only, by drying, grinding and classifying, with no chemical treatment. It contains no quartz and holds COSMOS Approved and NATRUE Approved certificates.


Use in formulations

Clay does not dissolve in water or in oil. In water and in glycols it disperses, meaning it forms a suspension of fine particles. It is added to the water phase, during the cooling phase, or afterwards to the finished product, at a temperature below 40 °C. The powder is odourless, so it does not change the fragrance of the product.

The usage rate is 1–30%. In formulations where clay only complements the other ingredients, around 1.5% is used and it is added in a later phase. Higher rates belong in masks and pastes, where clay is the main ingredient.

As the rate increases, so does the effect on the product. The clay makes it opaque, colours it beige-green and thickens it. On average it binds about 80% water and 58% oil, with a deviation of ± 10 depending on grain size. In formulations it is often combined with kaolin and bentonite, with xanthan gum and with glycerine.

The clay itself has an alkaline pH of 8–9, and the recommended pH range of the finished product is 7–9. Once incorporated, the pH shifts upwards, so always measure it. Clay is not suitable for acidic products without pH adjustment.


Suitable for products such as

  • Face masks and pastes – for oily, acne-prone and problem skin, where the clay binds sebum and mattifies.
  • Cleansing products and scrubs – fine particles gently smooth the skin during rinsing.
  • Shampoos and scalp masks – for hair prone to oiliness.
  • Soaps – the clay adds colour and a mildly abrasive effect.
  • Deodorants – its ability to absorb odours is put to use.
  • Body masks – at a higher usage rate as the main ingredient.
  • Colour cosmetics – a mineral ingredient that mattifies and adds opacity.

It can be used in both rinse-off and leave-on products.


Good to know

Every product that contains clay and water must be preserved. Clay has no antibacterial effect of its own, and a water-based clay paste without a preservative spoils microbially within a few days. Formulations with clay use, for example, Phenoxyethanol in combination with Ethylhexylglycerin.

Chemically, the clay is stable and inert. It does not oxidise, does not burn and combines with cosmetic ingredients without restrictions.

The fine powder creates dust during weighing and pouring. Work in a ventilated room, protect your eyes and, if ventilation is insufficient, use an FFP3 respirator. Spilled clay that becomes damp is slippery on the floor.


Frequently asked questions

Is French green clay soluble in water?
No, French green clay does not dissolve in water, it only disperses in it. It forms a suspension of fine particles that makes the product opaque and thickens it. It is also insoluble in oil, and in glycols it disperses in the same way as in water. It is added to the water phase, during the cooling phase, or to the finished product at a temperature below 40 °C.
What is the usage rate of green clay in cosmetics?
Green clay is used at a rate of 1–30%. In formulations where clay only complements the other ingredients, around 1.5% is used. In masks and pastes, where it is the main ingredient, a higher usage rate of up to 30% is used. As the rate increases, the product thickens and turns beige-green.
Does a product with green clay need to be preserved?
Yes, every product that contains green clay together with water needs a preservative. The clay itself does not suppress microorganisms, and an unpreserved clay paste spoils within a few days. Formulations with clay use, for example, Phenoxyethanol with Ethylhexylglycerin. In kaolin pastes, Phenoxyethanol passed a challenge test.
What skin type is green clay suitable for?
Green clay is suitable mainly for oily, acne-prone and problem skin. It binds excess sebum and impurities, so it mattifies and cleanses the skin. It is also used on the scalp and on hair prone to oiliness. It works in face, body and hair care, in both rinse-off and leave-on products.
What does ultra ventilated mean for green clay?
Ultra ventilated is a designation of grind fineness at which 90% of the clay particles are smaller than 30 µm. Such a powder disperses evenly in the product, the mask is smooth and no grains can be felt on the skin. The abrasive effect is mild. The clay is processed mechanically only, by drying, grinding and classifying, with no chemical treatment.
How does green clay affect the pH of a product?
Green clay shifts the pH of a product upwards, because it has an alkaline pH of 8–9 itself. The recommended pH range of the finished product is 7–9. Always measure the pH after incorporating the clay. Green clay is not suitable for acidic products without pH adjustment.

Parameters

INCI
Illite, Kaolin, Montmorillonite
CAS No.
12173-60-3, 1332-58-7, 1318-93-0
EC number
601-803-4, 310-194-1, 215-288-5
Product colour
Green
Country of origin
France
Processing method
DryingMillingSeparation
Appearance
Powder
Recommended processing temperature
< 40 °C
Application area
FaceHairScalpBody
Recommended usage rate
1 – 30 %
Recommended formulation pH range
7 – 9
Application type
Leave-onRinse-off
Biodegradability
Not applicable
Manufacturer's certificate
COSMOS ApprovedNATRUE Approved
Natural Index (NI ISO 16128)
1,00
Natural Origin Index (NOI ISO 16128)
1,00

Product documentation

CoACertificate of Analysis
batch 4825BIPDF ↓
batch 4254243BSILOBS4825BIPDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.