Yes, the packaging can be used repeatedly with proper handling and adherence to hygienic principles. Before each new filling, the bottle and the closure must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example isopropyl alcohol IPA 99 % isopropyl alkohol 1 l or plant-derived ethanol Etanol 96 % denaturovaný rastlinný 1 l. This reduces the risk of microbial contamination of the new product and ensures the stability of the formulation during storage.

Before further use, we recommend first mechanically cleaning the packaging – rinsing it with warm water and a mild cleaning agent suitable for contact with cosmetic packaging, then thoroughly rinsing with clean water and allowing it to dry completely. After drying, it is necessary to disinfect the inner walls of the bottle and the inside of the closure with an alcohol solution (for example products available on Handymade) and allow the alcohol to evaporate. Only then is the packaging ready for new filling, which minimizes the risk of your formulation being compromised.

To select a suitable bottle, vial or jar, we recommend using the advanced filter in the packaging material categories. The advanced filter is located at the top of the page after clicking on a specific category (for example bottles, jars or sprayers). Using it, you can conveniently filter packaging by neck type, size, colour and material, and thus quickly narrow down the offer to packaging that matches your formulation and design concept.

Yes, the lightweight and unbreakable plastic packaging with built-in flip-top closure is very practical for travelling and for everyday use in the bathroom. The closure allows quick opening with one hand and, after snapping shut, creates a compact system that, when properly tightened, reduces the risk of product leakage. When transporting in luggage, we recommend always placing the bottle in an upright position and, in the case of very fluid formulations, also using a secondary protective case or bag.

If you decide not to reuse the bottle, we recommend emptying it as much as possible of product residues and, if necessary, quickly rinsing it so that residues of cosmetic preparation do not enter the sorted waste. Then dispose of the packaging according to the recommendations listed in the parameter table for the product – place it in the container designated for the given type of plastic according to the local waste sorting system. It is advisable to separate the closure from the bottle itself in order to facilitate the recycling of the individual material components in the recycling process.