White Plastic Bottle, Transparent Cap, 150 ml

Name: White Plastic Bottle, Transparent Cap, 150 ml
SKU: O24PB150-OVV24PP3
Price: 0.69 EUR
Availability: InStock

White Plastic Bottle, Transparent Cap, 150 ml

The plastic bottle with transparent cap represents a universal packaging suitable for a wide range of cosmetic and liquid preparations where practical handling,... read more

In stock:

211 piece

Product code:

O24PB150-OVV24PP3

0,69 € incl. VAT

0,69 € / piece

SKLADOM piece

Set contains

White Plastic Bottle, 24/410, 150 ml Code: O24PB150

Clear Plastic Cap, Ribbed, 24/410 Code: OVV24PP3

Product description

The plastic bottle with transparent cap represents a universal packaging suitable for a wide range of cosmetic and liquid preparations where practical handling, content control and a professional appearance of the finished product are important. Thanks to its properties, this bottle is suitable for packaging various types of liquids as well as slightly viscous formulations, while allowing reliable closure and convenient use in both home and professional conditions.

Possible uses

packaging of liquid cosmetic products – facial and body toners, micellar waters, tonics, hair tonics, gentle cleansing solutions
practical bottle for various types of serums and emulsion solutions with lower viscosity
container for DIY cosmetic preparations, trial samples and test series of products
packaging for liquid technical and auxiliary solutions used in cosmetic production (e.g. cleaning and preparatory solutions that do not require special safety packaging)
bottle for hydrolates, air fresheners or aromatic blends according to the chosen type of closure or dispensing
temporary supply container for dosing and transferring intermediates and semi-finished products in cosmetic manufacturing

Packaging advantages

Material stability – the plastic used for the bottle body and the cap is designed to provide good dimensional stability and resistance during handling and transport under normal cosmetic use.
Practical protection of the contents – reliable closure by means of the transparent cap helps reduce the risk of unwanted leakage and contamination of the contents during storage and use.
Low weight – the bottle is lightweight, easy to carry and also suitable for travel-size packaging or cosmetic sets.
Good handling for the end user – the shape of the bottle contributes to comfortable holding in the hand and easy dosing of the contents according to the selected type of closure or applicator.
Universal use – the container is suitable for various types of face, body and hair care products, which facilitates unification of the packaging portfolio for your own brand.

Combining with closures and dispensers

The bottles are compatible with various types of closures and dispensing systems (for example screw caps, droppers, spray pumps or practical applicators) according to the parameters selected in the product detail.
Combinations of packaging and closures created directly on Handymade are tested and functional in terms of basic compatibility and usability.
For all combinations, however, we recommend always performing your own compatibility test – in particular from the point of view of sealing, dosing, long-term stability and the behaviour of the packaging in contact with the specific formulation of the product.
Before launching the finished product on the market, we also recommend testing user comfort for the customer (pressing comfort, uniformity of the dose, easy opening and closing).

Technical parameters

All technical parameters of the packaging are given in the enclosed Packaging Quality Certificate and in the product parameters.
In the parameter table next to the product you will find information on the material used, neck type, volume and other properties important for the correct selection of the packaging.
When working with the packaging, we recommend also following the recommendations stated in the quality certificate, especially in relation to suitability for specific types of fills and storage conditions.
If you decide not to further recycle the packaging through repeated use, adapt its disposal to the material information given in the product parameters and to local waste sorting rules.

FAQ – Frequently asked questions

Can this plastic bottle be used repeatedly?

The packaging can be reused under normal use, provided it is in good technical condition and you observe basic hygiene rules. Before each new filling, it is necessary to thoroughly clean the bottle and then disinfect it with a suitable alcohol-based preparation – for example using IPA 99 % isopropyl alcohol or 96 % plant-denatured ethanol. Disinfection helps to minimise the risk of microbial contamination and to extend the shelf life of the filled product.

How should the bottle be properly cleaned and disinfected before refilling?

Before reuse, we recommend first mechanically cleaning the bottle and cap with warm water and a suitable detergent, rinsing thoroughly and allowing them to dry. It is then advisable to rinse or spray the inner walls and the neck with an alcohol-based disinfectant solution, for example IPA 99 % isopropyl alcohol or 96 % plant-denatured ethanol. After disinfection, allow the packaging to air-dry at room temperature and only then refill it.

How do I choose a suitable closure or dispenser for this bottle?

When selecting a closure or dispenser, it is important to follow the thread type and the recommendations given in the product parameters. In the closure, dropper and spray pump categories on Handymade you will find components that are directly linked to specific bottles, so they are tested in terms of dimensions and sealing. Even with such recommended combinations, it is advisable to carry out your own test – check the tightness of the joint, the dispensed amount and the behaviour of your specific product during longer-term storage.

How can I correctly recycle this bottle if I no longer want to use it?

The method of recycling depends on the material, which is always stated in the parameter table next to the product. After using up the contents, remove any product residues, optionally rinse the bottle and place the sorted waste in the appropriate container according to the material designation (typically a plastic container for plastic packaging). If the cap is made from a different material than the body of the packaging, it is advisable to separate them and sort them individually. Always follow the local waste sorting rules in your municipality or city.

You offer many types of packaging – how can I find the right one for my product?

To make it easier to choose a suitable bottle, pharmaceutical bottle or jar, you can use the extended filter located at the top of the page after clicking on a specific packaging category. With its help, you can display only those packages that meet your requirements – you can filter by neck type, size, colour and material. By combining multiple parameters, you will quickly find packaging suitable for the given product type and the desired design of your brand.