Yes, the container can be used repeatedly if hygiene principles are followed. Before each new filling, we recommend thoroughly cleaning and disinfecting the bottle to minimise the risk of microbial contamination and product deterioration. For disinfection you can use, for example, isopropyl alcohol IPA 99 % isopropyl alkohol or plant-based ethanol Etanol 96 % denaturovaný rastlinný. After disinfection, let the container dry completely at room temperature and only then refill it.

First, we recommend rinsing the bottle with a suitable cleaning agent or with warm water and detergent to remove residues of the original product. Then treat both the inner and outer surfaces with disinfectant alcohol, for example with the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After applying the alcohol, allow the packaging to dry naturally and do not fill it until it is completely dry. When cleaning, avoid aggressive solvents that could negatively affect the packaging material.

If you decide not to use the packaging further, we recommend placing it in sorted waste collection according to the material specified in the product parameters on the packaging page. Before handing it over for collection, remove product residues, any removable labels and empty the container as much as possible. Correct sorting enables more efficient recycling of the material and its re-use in further production. In the case of a combination of several materials, always give preference to the recommendations of the local waste sorting system.

The design of the bottle with flip top closure is suitable for a wide range of viscosities – from thin liquids to medium-thick gels. With very thick formulations, dispensing may be slower, and it is advisable to test whether it suits your way of use and target group. Before launching the product, we recommend producing a smaller pilot series to verify dispensing comfort even after longer storage and at different ambient temperatures.

To choose a suitable bottle, jar or other container, you can use the extended filter located at the top of the page after clicking on a specific packaging category. Thanks to the filter, you can quickly narrow down the offer according to the parameters that are key for your project – for example according to neck type, required size, colour or material. By combining several filters, you will find the packaging that best matches your formulation, the dosing method and the visual style of your brand.