Yes, the bottle with sprayer is suitable for repeated use, provided that basic hygiene principles are observed and the packaging is not mechanically damaged. Before each new filling, the packaging must be thoroughly cleaned and disinfected, ideally using suitable alcohol‑based disinfectants, such as isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol or Etanol 96 % denaturovaný rastlinný. Only after thorough rinsing and drying is the bottle ready for further safe use.

The bottle is made of PET material, which is light and practical, but is not intended for contact with high temperatures. The PET material should not be exposed to high temperatures, because at such temperatures there is a risk of deformation of the packaging and deterioration of its functional properties. The packaging is not suitable for washing in a dishwasher or for boiling. Hand cleaning with lukewarm water and a mild cleaning agent is recommended, followed by disinfection as needed.

The bottle with trigger sprayer is suitable for common water‑based cleaning agents, universal surface cleaners, glass cleaners, bathroom and kitchen cleaners, furniture care products and cleaners for car interiors. For very aggressive chemicals or highly viscous formulations, we recommend always carrying out your own compatibility test – verifying the behaviour of the plastic, the sealing of the sprayer and the smoothness of dosing in contact with the specific product.

Before repeated filling, first rinse the bottle thoroughly with lukewarm water and a mild cleaning agent and let it drain well. Then we recommend disinfecting the inside of the packaging and parts of the sprayer with a suitable alcohol solution. For this purpose, the products IPA 99 % isopropyl alcohol or Etanol 96 % denaturovaný rastlinný have proved effective. After applying the disinfectant, allow the packaging to dry in the air. Do not use high temperatures, do not boil the bottle and do not wash it in a dishwasher, to prevent deformation of the PET material.

If you decide not to reuse the packaging, we recommend recycling it correctly according to the material designation given in the product parameters. The bottle is made of PET plastic, so after emptying and rinsing out the residues of the cleaning agent, place it in the separate collection of plastics according to local waste collection rules. The spray head should be separated and disposed of according to the instructions for mixed or separately collected plastic waste – follow the information from the parameter table at the product on the Handymade website. In this way you will support the reuse of the material and reduce the amount of municipal waste.

The simplest way is to use the advanced filter in the given packaging category. You can find the advanced filter at the top of the page after clicking on a specific category (for example bottles, jars, sprayers). With the filter you can clearly sort the packaging by neck type, size, colour and material, which makes it easier to choose a suitable bottle, vial or jar for your product. We recommend defining in advance the required type of dosing, the preferred material and the appearance of the packaging – the filter will then display only those options that meet your criteria.