Before the first filling, we recommend mechanically cleaning the bottle and the dispenser, rinsing them and then disinfecting them with a suitable alcohol-based product. For disinfection, you can use for example the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After applying the alcohol, allow all parts to dry thoroughly at room temperature to remove residual moisture before filling with the final product.

Yes, the packaging can be used repeatedly if hygiene principles are observed. With each new filling, it is important to first thoroughly clean and disinfect the bottle and the dispenser in order to minimise the risk of microbial contamination or residues of the previous product. For disinfection, we recommend alcohol-based products, for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. At the same time, it is advisable to continuously check the condition of the dispenser and the seals and replace them in case of visible wear.

If you decide not to use the packaging further, we recommend recycling it according to the material composition listed in the product parameters. The glass container can usually be sorted into the container designated for glass after removing product residues and labels. Plastic or combined parts of the dispenser should, where possible, be separated and sorted according to local waste collection rules, or handed over within sorted municipal collection. Before recycling, empty and rinse the bottle so that no significant product residues remain.

The oil dispenser is ideal for low- to medium-viscosity oil-based preparations, such as face and body oils, hair oils, massage oils or oil serums. For very thick or gel-like formulations, dosing may be limited, so we recommend always carrying out a trial filling and testing the smoothness of dosing as well as the return of the dispenser spring before final use in serial production or for larger filling volumes.

For easy search of suitable packaging, there is an extended filter located at the top of the page after clicking on a specific category of packaging. Using the filter, you can clearly narrow down the offer according to parameters such as type of neck, size, colour or material of the bottle or jar. This allows you to quickly choose a combination of packaging and closure that will best match the properties of your product and the intended method of dosing.